Woods Equipment FZ28K, FZ23B manual Install Clutch, Align Belt, Reassemble Components

Page 24

Install Clutch

1.Install clutch spacer (10) over engine shaft with the chamfer side towards the engine. See Figure 14.

10

DP10

Figure 14. Clutch Spacer Installed

2.For FZ23B Only: Align keyway of new D-Drive hub (45) with key of clutch and press into front of clutch. See Figure 15 and Figure 16.

Figure 15. D-Drive Hub Installed

NOTICE

D-Drive hub must be installed using an arbor press. When installing, inner race must be sup- ported or bearing damage may occur.

All Models

3.Install clutch onto engine shaft.

4.Secure clutch to engine shaft using 7/16 NF cap screw (21) and lock washer (50) previously removed.

NOTE: Place a drop of Loctite 242 (blue) on threads of cap screw before installing.

5.Torque cap screw to 50 lbs-ft.

45

50

21

DP11

10. Clutch spacer (see Figure 14)

21. 7/16 NF HHCS GR5

45. D-Drive hub

50. 7/16 Lock washer

Figure 16. Clutch, D-Drive Hub, & Hardware Installed

6.Check belt alignment and if necessary adjust PTO sheave on shaft. See Align Belt.

NOTE: If belt alignment is not necessary proceed to Reassemble Components.

Align Belt

7.Loosen the taper bolts (13), adjust sheave (2), and tighten bolts to 95 lbs-inch.

2. PTO sheave

13. 1/4 NC x 3/4 HHCS GR5

19. Electric clutch, mag-stop 1-1/8

49. Taper lock

Figure 17. Align Clutch & PTO Sheave

Reassemble Components

1.Install PTO V-belts (22) over PTO sheave (2) and clutch (19).

24 Dealer Service

MAN0875 (2/8/2011)

 

 

Image 24
Contents MOW’N Machinetm Introduction To the DealerTable of Contents Specifications General InformationSafety Safety RulesTraining PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Replace Immediately If DamagedBe Careful Controls and Switches OperationOperation Starting Engine Starting Mower or AttachmentPractice Operation Steering Handle Operation Steering Handle Positions„ Watch for hidden hazards on the terrain during operation Moving Disabled Power Unit Weight Transfer SystemStopping Engine Owner PRE-OPERATION Check List Owners ResponsibilityOwner Service Owner ServiceService Engine Lubrication InformationTailwheel Maintenance Lubrication DiagramHydrostatic Transmission Service Service BatteryHydraulic Transmission Change OIL & Filter Refer to FigureCleaning Burnish ClutchReturn to Operation After Each UseDealer Service Dealer ServiceTroubleshooting Hydrostatic Pump No Positive Neutral PositionTroubleshooting Engine Engine Dies When Steering Handles are EngagedEngine will not crank Engine cranks but will not startTroubleshooting Deck Safety Switch Hydrostatic Pump InstallationHydrostatic Pump Removal Belt RemovalParking Brake Adjustment Clutch RepairRemove Components Refer to & FigureInstall Clutch Align BeltReassemble Components Clutch & Drive Components Reassembled Assembly AssemblyInstall Drive Tires Adjust Steering HandlesInstall Single Tailwheel Optional Single Tailwheel InstallationDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListParts Index Mow’n Machine FZ23B, FZ28K PartsFZ23B, FZ28K Frame Assembly FZ23B, FZ28K Frame Assembly Parts List Part QTY DescriptionFZ23B Engine Assembly FZ23B Engine Assembly Parts List FZ28K Engine Assembly FZ28K Engine Assembly Parts List Hydraulic Reservoir & Hoses Hydraulic Reservoir & Hoses Parts List Hydraulic DiagramPTO, Clutch & Pump Assembly PTO Clutch & Pump Assembly Parts List GR5Seat & Hood Assembly Tailwheel Assembly Single Tailwheel AssemblyWide Stance Tailwheel Assembly Brake Assembly Brake Assembly Parts List Headlight KIT OptionalCounterweight Mount KIT Steering Assembly Diagram FZ23B Wiring FZ23B Wiring Diagram Parts List SN 1177489 & UPFZ28K Wiring Diagram SN 1177489 & UP FZ28K Wiring Diagram Parts List Bolt Torque Chart SAE Series Torque ChartMetric Series Torque Chart AppendixBolt Size Chart AbbreviationsIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mowers

FZ23B, FZ28K specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscape maintenance equipment. Among its notable innovations are the FZ28K and FZ23B models, designed for immense versatility and efficiency in various applications.

The Woods FZ28K is known for its robust construction and powerful performance. This model features a 28-inch cutting deck, making it ideal for large-scale mowing tasks. The FZ28K is equipped with a high-performance engine designed for durability and reliability, allowing operators to tackle tough terrain with ease. Its advanced cutting technology ensures a clean and even cut, promoting healthier grass growth. Enhanced maneuverability is achieved through its compact design, allowing users to navigate tight spaces effortlessly.

On the other hand, the FZ23B model is built for versatility and ease of use in a multitude of applications. With a 23-inch cutting deck, it is perfect for both residential and commercial properties. The FZ23B prioritizes user comfort, featuring an ergonomic design and intuitive controls that reduce operator fatigue during extended use. Its lightweight structure does not compromise strength, making it nimble enough for intricate mowing tasks while remaining sturdy for larger areas.

Both models utilize cutting-edge technology that optimizes power and efficiency. Featuring adjustable cutting heights, operators can customize their mowing experience, ensuring the best results for their specific lawn conditions. The advanced engine technology in both the FZ28K and FZ23B models ensures reduced emissions, contributing to environmentally friendly operation while still delivering excellent performance.

Another key characteristic of Woods Equipment’s offerings is their ease of maintenance. Both models come with accessible service points, allowing users to perform routine maintenance with minimal effort. This focus on user experience extends to the design of the mower decks, which are constructed for easy cleaning and upkeep.

In conclusion, the Woods Equipment FZ28K and FZ23B mowers represent the perfect blend of power, efficiency, and user-centric design. Their advanced features and technologies empower operators to achieve professional-grade results while ensuring comfort and ease of use. Whether mowing large pastures or manicuring residential lawns, the Woods FZ series stands ready to meet diverse landscaping needs, solidifying Woods Equipment’s reputation for excellence in outdoor power tools.