Woods Equipment FZ28K, FZ23B manual Assembly, Dealer SET-UP Instructions, Install Drive Tires

Page 26

ASSEMBLY

DEALER SET-UP INSTRUCTIONS

Assembly of this Mow’n Machine is the responsibility of the Woods dealer. It should be delivered to the owner completely assembled, lubricated, and adjusted for normal cutting conditions.

Set up the Mow’n Machine as received from the factory with these instructions. Complete the Dealer Check Lists on page 28 when assembly is completed.

Power Unit Preparation

1.Remove crating from around power unit. Remove power unit from pallet and place on blocks.

2.Remove Operator’s Manual from power unit frame and save for original retail purchaser.

NOTE: Dealer must complete and return product registration card at time of sale.

Lubrication

NOTICE

■Running engine without oil will cause engine failure.

1.Check engine oil level (30W).

2.Check that oil levels (20W-50) in transmission reservoir are full.

NOTE: See Owner Service section for engine, transmission, and lubrication information.

Fuel

Fill fuel tank with the correct fuel. Refer to engine man- ual.

INSTALL DRIVE TIRES

 

 

1

1.

Lug Bolt

DP5

 

 

Figure 19. Drive Tire Installed

1.Install drive tires using five lug bolts (1) from bag of loose parts shipped with machine.

2.Torque lug bolts to 85 lbs-ft.

Drive Tire Pressure:

Turf Tires

12 psi

Knobby Tires

12 psi

Chevron Tires

10 - 12 psi

ADJUST STEERING HANDLES

2

1

3

4

DP8

1.Steering lever

2.Steering lever mount

3.5/16 NC x 1 Whiz bolt

4.5/16 Flanged lock nut

Figure 20. Steering Handle Adjustment

The steering handles are shipped loose, inside the foot rest.

1.Remove whiz bolt (3) and lock nut (4) from left steering lever mount (2).

2.Position steering handle (1) to desired location on steering lever mount (2). The top and middle holes are for taller operators and the middle and bottom holes are for shorter operators. Do not tighten hardware at this time. Repeat steps 1 and 2 for right steering handle.

3.Rotate handles inward. Align handles with one another. Torque all hardware to 12 lbs-ft. Make sure handles stay in alignment.

26 Assembly

MAN0875 (2/8/2011)

 

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents MOW’N Machinetm Introduction To the DealerTable of Contents Specifications General InformationTraining SafetySafety Rules PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Replace Immediately If DamagedBe Careful Operation Controls and SwitchesOperation Practice Operation Starting EngineStarting Mower or Attachment „ Watch for hidden hazards on the terrain during operation Steering Handle OperationSteering Handle Positions Stopping Engine Moving Disabled Power UnitWeight Transfer System Owner PRE-OPERATION Check List Owners ResponsibilityService Engine Owner ServiceOwner Service Lubrication InformationTailwheel Maintenance Lubrication DiagramHydraulic Transmission Change OIL & Filter Hydrostatic Transmission ServiceService Battery Refer to FigureReturn to Operation CleaningBurnish Clutch After Each UseTroubleshooting Hydrostatic Pump Dealer ServiceDealer Service No Positive Neutral PositionEngine will not crank Troubleshooting EngineEngine Dies When Steering Handles are Engaged Engine cranks but will not startHydrostatic Pump Removal Troubleshooting Deck Safety SwitchHydrostatic Pump Installation Belt RemovalRemove Components Parking Brake AdjustmentClutch Repair Refer to & FigureReassemble Components Install ClutchAlign Belt Clutch & Drive Components Reassembled Install Drive Tires AssemblyAssembly Adjust Steering HandlesInstall Single Tailwheel Optional Single Tailwheel InstallationPRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListParts Index Mow’n Machine FZ23B, FZ28K PartsFZ23B, FZ28K Frame Assembly FZ23B, FZ28K Frame Assembly Parts List Part QTY DescriptionFZ23B Engine Assembly FZ23B Engine Assembly Parts List FZ28K Engine Assembly FZ28K Engine Assembly Parts List Hydraulic Reservoir & Hoses Hydraulic Reservoir & Hoses Parts List Hydraulic DiagramPTO, Clutch & Pump Assembly PTO Clutch & Pump Assembly Parts List GR5Seat & Hood Assembly Wide Stance Tailwheel Assembly Tailwheel AssemblySingle Tailwheel Assembly Brake Assembly Brake Assembly Parts List Headlight KIT OptionalCounterweight Mount KIT Steering Assembly Diagram FZ23B Wiring FZ23B Wiring Diagram Parts List SN 1177489 & UPFZ28K Wiring Diagram SN 1177489 & UP FZ28K Wiring Diagram Parts List Metric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart AppendixBolt Size Chart AbbreviationsIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mowers

FZ23B, FZ28K specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscape maintenance equipment. Among its notable innovations are the FZ28K and FZ23B models, designed for immense versatility and efficiency in various applications.

The Woods FZ28K is known for its robust construction and powerful performance. This model features a 28-inch cutting deck, making it ideal for large-scale mowing tasks. The FZ28K is equipped with a high-performance engine designed for durability and reliability, allowing operators to tackle tough terrain with ease. Its advanced cutting technology ensures a clean and even cut, promoting healthier grass growth. Enhanced maneuverability is achieved through its compact design, allowing users to navigate tight spaces effortlessly.

On the other hand, the FZ23B model is built for versatility and ease of use in a multitude of applications. With a 23-inch cutting deck, it is perfect for both residential and commercial properties. The FZ23B prioritizes user comfort, featuring an ergonomic design and intuitive controls that reduce operator fatigue during extended use. Its lightweight structure does not compromise strength, making it nimble enough for intricate mowing tasks while remaining sturdy for larger areas.

Both models utilize cutting-edge technology that optimizes power and efficiency. Featuring adjustable cutting heights, operators can customize their mowing experience, ensuring the best results for their specific lawn conditions. The advanced engine technology in both the FZ28K and FZ23B models ensures reduced emissions, contributing to environmentally friendly operation while still delivering excellent performance.

Another key characteristic of Woods Equipment’s offerings is their ease of maintenance. Both models come with accessible service points, allowing users to perform routine maintenance with minimal effort. This focus on user experience extends to the design of the mower decks, which are constructed for easy cleaning and upkeep.

In conclusion, the Woods Equipment FZ28K and FZ23B mowers represent the perfect blend of power, efficiency, and user-centric design. Their advanced features and technologies empower operators to achieve professional-grade results while ensuring comfort and ease of use. Whether mowing large pastures or manicuring residential lawns, the Woods FZ series stands ready to meet diverse landscaping needs, solidifying Woods Equipment’s reputation for excellence in outdoor power tools.
Top Page Image Contents