Woods Equipment FZ23B, FZ28K manual Burnish Clutch, Return to Operation, Cleaning, After Each Use

Page 19

3.Inspect battery to make sure tie-down is tight and battery is secured in place.

4.Inspect battery case for cracks or leaks; replace battery if necessary.

5.Test battery with hydrometer; recharge battery if less than 75% charge is indicated.

6.Add water if necessary.

BURNISH CLUTCH

NOTICE

■A new clutch or one that has not been used for three months, will require burnishing to dress drive surface. The clutch could fail if you do not accom- plish the following procedure.

1.Place steering control handles in the neutral position. Start engine and run at half throttle.

2.Turn clutch switch (PTO) “ON” 30 seconds and “OFF” for 30 seconds. Repeat cycle 20 times.

NOTE: The 30 seconds “OFF” allows clutch surface to cool.

RETURN TO OPERATION

„Make sure shields and guards are properly installed and in good condition. Replace if damaged.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

CLEANING

After Each Use

●Remove large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Inspect machine and replace worn or damaged parts.

●Replace any safety decals that are missing or not readable.

Periodically or Before Extended Storage

●Clean large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Remove the remainder using a low-pressure water spray.

1.Be careful when spraying near scratched or torn safety decals or near edges of decals as water spray can peel decal off surface.

2.Be careful when spraying near chipped or scratched paint as water spray can lift paint.

3.If a pressure washer is used, follow the advice of the pressure washer manufacturer.

●Inspect machine and replace worn or damaged parts.

●Sand down scratches and the edges of areas of missing paint and coat with Woods spray paint of matching color (purchase from your Woods dealer).

●Replace any safety decals that are missing or not readable (supplied free by your Woods dealer). See Safety Decals section on page 9 for location drawing.

™

MAN0875 (2/8/2011)

Owner Service 19

 

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MOW’N Machinetm To the Dealer IntroductionTable of Contents General Information SpecificationsPreparation SafetySafety Rules TrainingOperation TransportationMaintenance Storage Replace Immediately If Damaged Safety & Instructional DecalsBe Careful Operation Controls and SwitchesOperation Starting Mower or Attachment Starting EnginePractice Operation Steering Handle Positions Steering Handle Operation„ Watch for hidden hazards on the terrain during operation Weight Transfer System Moving Disabled Power UnitStopping Engine Owners Responsibility Owner PRE-OPERATION Check ListLubrication Information Owner ServiceOwner Service Service EngineLubrication Diagram Tailwheel MaintenanceRefer to Figure Hydrostatic Transmission ServiceService Battery Hydraulic Transmission Change OIL & FilterAfter Each Use CleaningBurnish Clutch Return to OperationNo Positive Neutral Position Dealer ServiceDealer Service Troubleshooting Hydrostatic PumpEngine cranks but will not start Troubleshooting EngineEngine Dies When Steering Handles are Engaged Engine will not crankBelt Removal Troubleshooting Deck Safety SwitchHydrostatic Pump Installation Hydrostatic Pump RemovalRefer to & Figure Parking Brake AdjustmentClutch Repair Remove ComponentsAlign Belt Install ClutchReassemble Components Clutch & Drive Components Reassembled Adjust Steering Handles AssemblyAssembly Install Drive TiresSingle Tailwheel Installation Install Single Tailwheel OptionalDelivery Check List Dealer Check ListsDealer Check Lists PRE-DELIVERY Check ListParts Parts Index Mow’n Machine FZ23B, FZ28KFZ23B, FZ28K Frame Assembly Part QTY Description FZ23B, FZ28K Frame Assembly Parts ListFZ23B Engine Assembly FZ23B Engine Assembly Parts List FZ28K Engine Assembly FZ28K Engine Assembly Parts List Hydraulic Reservoir & Hoses Hydraulic Diagram Hydraulic Reservoir & Hoses Parts ListPTO, Clutch & Pump Assembly GR5 PTO Clutch & Pump Assembly Parts ListSeat & Hood Assembly Single Tailwheel Assembly Tailwheel AssemblyWide Stance Tailwheel Assembly Brake Assembly Headlight KIT Optional Brake Assembly Parts ListCounterweight Mount KIT Steering Assembly Diagram FZ23B Wiring SN 1177489 & UP FZ23B Wiring Diagram Parts ListFZ28K Wiring Diagram SN 1177489 & UP FZ28K Wiring Diagram Parts List Appendix Bolt Torque ChartSAE Series Torque Chart Metric Series Torque ChartAbbreviations Bolt Size ChartIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mowers

FZ23B, FZ28K specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscape maintenance equipment. Among its notable innovations are the FZ28K and FZ23B models, designed for immense versatility and efficiency in various applications.

The Woods FZ28K is known for its robust construction and powerful performance. This model features a 28-inch cutting deck, making it ideal for large-scale mowing tasks. The FZ28K is equipped with a high-performance engine designed for durability and reliability, allowing operators to tackle tough terrain with ease. Its advanced cutting technology ensures a clean and even cut, promoting healthier grass growth. Enhanced maneuverability is achieved through its compact design, allowing users to navigate tight spaces effortlessly.

On the other hand, the FZ23B model is built for versatility and ease of use in a multitude of applications. With a 23-inch cutting deck, it is perfect for both residential and commercial properties. The FZ23B prioritizes user comfort, featuring an ergonomic design and intuitive controls that reduce operator fatigue during extended use. Its lightweight structure does not compromise strength, making it nimble enough for intricate mowing tasks while remaining sturdy for larger areas.

Both models utilize cutting-edge technology that optimizes power and efficiency. Featuring adjustable cutting heights, operators can customize their mowing experience, ensuring the best results for their specific lawn conditions. The advanced engine technology in both the FZ28K and FZ23B models ensures reduced emissions, contributing to environmentally friendly operation while still delivering excellent performance.

Another key characteristic of Woods Equipment’s offerings is their ease of maintenance. Both models come with accessible service points, allowing users to perform routine maintenance with minimal effort. This focus on user experience extends to the design of the mower decks, which are constructed for easy cleaning and upkeep.

In conclusion, the Woods Equipment FZ28K and FZ23B mowers represent the perfect blend of power, efficiency, and user-centric design. Their advanced features and technologies empower operators to achieve professional-grade results while ensuring comfort and ease of use. Whether mowing large pastures or manicuring residential lawns, the Woods FZ series stands ready to meet diverse landscaping needs, solidifying Woods Equipment’s reputation for excellence in outdoor power tools.
Top Page Image Contents