Woods Equipment FZ23B, FZ28K manual Parking Brake Adjustment, Clutch Repair, Remove Components

Page 23

PARKING BRAKE ADJUSTMENT

NOTICE

Overtightening the brake can cause internal damage to the brake linkage.

NOTE: Adjust right and left brakes individually.

1.Disconnect clevis from right parking brake and brake handle linkages.

2.Adjust left parking brake pull rod until brake rock shaft lug is perpendicular with the bottom edge of the frame rail.

3.Readjust and reconnect clevis for parking brake handle linkage.

NOTE: Approximately 12 to 13 lbs. of force at the top of the handle is needed to apply the single brake.

4.Reconnect right parking brake rod.

5.Disconnect clevis from left parking brake and brake handle linkages.

6.Adjust right parking brake pull rod until brake rock shaft lug is perpendicular with the bottom edge of the frame rail.

7.Reconnect parking brake rod.

NOTE: Approximately 24 to 26 lbs. of force at the top of the handle is needed to apply both brakes.

CLUTCH REPAIR

Remove Components

1.Position Mow’n Machine on a level work area.

2.Set parking brake, stop engine, and remove key.

Refer to Figure 12 & Figure 13.

16

21 50 20

48

6

2

22

DP9

Figure 12. Clutch and Sheave Assembly

NOTE: Photo in Figure 12 was taken from underneath the power unit for clarification. All work can be per- formed from above.

NOTE: It may be easier to rework clutch if you first remove the counterweights from the rear of the power unit.

3.Place a 9/16 wrench over cap screw (6) on idler

(48)and remove the tension from PTO V-belts (22) by rotating the wrench clockwise.

4.Remove PTO V-belts (22) from PTO drive sheave

(2).

5.Disconnect electrical wire harness from clutch.

6.Disconnect clutch cable (16) from clutch.

7.Remove cap screw (21), lock washer (50) and retaining washer (20) from end of clutch.

8.Remove clutch (19) and clutch spacer (10) from engine shaft.

2. PTO sheave

6.3/8 NC x 1-3/4 HHCS

10.Clutch spacer

16.Cable, clutch stop

19.Electric clutch, mag-stop 1-1/8

20.Retaining washer (FZ28K)

21.7/16 NF HHCS

22.PTO V-belt set, matched

45. D-Drive hub (FZ23B only)

48. Idler

50. 7/16 Lock washer

Figure 13. Clutch Assembly

MAN0875 (2/8/2011)

Dealer Service 23

 

 

Image 23
Contents MOW’N Machinetm To the Dealer IntroductionTable of Contents General Information SpecificationsPreparation SafetySafety Rules TrainingOperation TransportationMaintenance Storage Replace Immediately If Damaged Safety & Instructional DecalsBe Careful Operation Controls and SwitchesOperation Practice Operation Starting EngineStarting Mower or Attachment „ Watch for hidden hazards on the terrain during operation Steering Handle OperationSteering Handle Positions Stopping Engine Moving Disabled Power UnitWeight Transfer System Owners Responsibility Owner PRE-OPERATION Check ListLubrication Information Owner ServiceOwner Service Service EngineLubrication Diagram Tailwheel MaintenanceRefer to Figure Hydrostatic Transmission ServiceService Battery Hydraulic Transmission Change OIL & FilterAfter Each Use CleaningBurnish Clutch Return to OperationNo Positive Neutral Position Dealer ServiceDealer Service Troubleshooting Hydrostatic PumpEngine cranks but will not start Troubleshooting EngineEngine Dies When Steering Handles are Engaged Engine will not crankBelt Removal Troubleshooting Deck Safety SwitchHydrostatic Pump Installation Hydrostatic Pump RemovalRefer to & Figure Parking Brake AdjustmentClutch Repair Remove ComponentsReassemble Components Install ClutchAlign Belt Clutch & Drive Components Reassembled Adjust Steering Handles AssemblyAssembly Install Drive TiresSingle Tailwheel Installation Install Single Tailwheel OptionalDelivery Check List Dealer Check ListsDealer Check Lists PRE-DELIVERY Check ListParts Parts Index Mow’n Machine FZ23B, FZ28KFZ23B, FZ28K Frame Assembly Part QTY Description FZ23B, FZ28K Frame Assembly Parts ListFZ23B Engine Assembly FZ23B Engine Assembly Parts List FZ28K Engine Assembly FZ28K Engine Assembly Parts List Hydraulic Reservoir & Hoses Hydraulic Diagram Hydraulic Reservoir & Hoses Parts ListPTO, Clutch & Pump Assembly GR5 PTO Clutch & Pump Assembly Parts ListSeat & Hood Assembly Wide Stance Tailwheel Assembly Tailwheel AssemblySingle Tailwheel Assembly Brake Assembly Headlight KIT Optional Brake Assembly Parts ListCounterweight Mount KIT Steering Assembly Diagram FZ23B Wiring SN 1177489 & UP FZ23B Wiring Diagram Parts ListFZ28K Wiring Diagram SN 1177489 & UP FZ28K Wiring Diagram Parts List Appendix Bolt Torque ChartSAE Series Torque Chart Metric Series Torque ChartAbbreviations Bolt Size ChartIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mowers

FZ23B, FZ28K specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscape maintenance equipment. Among its notable innovations are the FZ28K and FZ23B models, designed for immense versatility and efficiency in various applications.

The Woods FZ28K is known for its robust construction and powerful performance. This model features a 28-inch cutting deck, making it ideal for large-scale mowing tasks. The FZ28K is equipped with a high-performance engine designed for durability and reliability, allowing operators to tackle tough terrain with ease. Its advanced cutting technology ensures a clean and even cut, promoting healthier grass growth. Enhanced maneuverability is achieved through its compact design, allowing users to navigate tight spaces effortlessly.

On the other hand, the FZ23B model is built for versatility and ease of use in a multitude of applications. With a 23-inch cutting deck, it is perfect for both residential and commercial properties. The FZ23B prioritizes user comfort, featuring an ergonomic design and intuitive controls that reduce operator fatigue during extended use. Its lightweight structure does not compromise strength, making it nimble enough for intricate mowing tasks while remaining sturdy for larger areas.

Both models utilize cutting-edge technology that optimizes power and efficiency. Featuring adjustable cutting heights, operators can customize their mowing experience, ensuring the best results for their specific lawn conditions. The advanced engine technology in both the FZ28K and FZ23B models ensures reduced emissions, contributing to environmentally friendly operation while still delivering excellent performance.

Another key characteristic of Woods Equipment’s offerings is their ease of maintenance. Both models come with accessible service points, allowing users to perform routine maintenance with minimal effort. This focus on user experience extends to the design of the mower decks, which are constructed for easy cleaning and upkeep.

In conclusion, the Woods Equipment FZ28K and FZ23B mowers represent the perfect blend of power, efficiency, and user-centric design. Their advanced features and technologies empower operators to achieve professional-grade results while ensuring comfort and ease of use. Whether mowing large pastures or manicuring residential lawns, the Woods FZ series stands ready to meet diverse landscaping needs, solidifying Woods Equipment’s reputation for excellence in outdoor power tools.