Woods Equipment 1023000 installation manual Install Crossmember, Torque Mounting Hardware

Install Crossmember

1.	Place crossmember (7) in front of drawbar	7. 1024052		Crossmember
	bracket and secure using two cap screws (15)	12.	902	5/8 NC x 2 HHCS GR5
	and hardened flat washers (17).	15.	307431	M16 x 1.5P x 45 mm HHCS
2.	Secure to right and left tractor brackets using four	17.	57817	5/8 Hardened flat washer
	(two per side) cap screws (12), eight (four per	20.	230	5/8 NC Hex nut

side) hardened flat washers (17) and hex nuts (20).

12

17

	17	7
DP6	15

Figure 8. Undermount Installed

Figure 9. Undermount Installation

Torque Mounting Hardware

	TORQUE SPECIFICATIONS
			Wrench
Ref	Cap Screw	Qty	Size	Required Torque
11	5/8 NC x 3-3/4 HHCS GR5	4	15/16"	170 lbs-ft (230 N-m)
12	5/8 NC x 2 HHCS GR5	10	15/16"	170 lbs-ft (230 N-m)
14	M16 x 1.5P x 60 mm CL 10.9	8	24 mm	184 lbs-ft (250 N-m)
15	M16 x 1.5P x 45 mm	10	24 mm	133 lbs-ft (181 N-m)

8 Installation MAN0579 (1/19/2007)