Woods Equipment 1023000 Attach Backhoe Brackets to Backhoe, Backhoe Bracket Installation

Attach Backhoe Brackets to Backhoe

NOTE: Leave all hardware loose until backhoe has been mounted to the tractor.

1.Attach right backhoe bracket (3) and left backhoe bracket (4) to backhoe frame.

2.Secure into position using six (three per bracket) cap screws (10), hardened flat washers (16), and hex nuts (19).

3.Place crossbrace (8) between right and left back- hoe brackets. Secure using four cap screws (13), hardened flat washers (18), and hex nuts (21).

3.1023006 Right backhoe bracket

4.1023007 Left backhoe bracket

8.1024322 Crossbrace

10.735 3/4 NC x 2 HHCS GR5

13.3379 1/2 NC x 1-1/2 HHCS GR5

16.57798 3/4 Hardened flat washer

18.	57816	1/2 Hardened flat washer	Figure 10. Backhoe Bracket Installation
19.	1450	3/4 NC Hex nut

21.1093 1/2 NC Hex nut

As a valued customer, Woods appreciates your comments. Once sub-frame and hydrau- lic hoses have been installed, please take a few minutes to complete the Sub-Frame Mount Evaluation sheet that was supplied with your sub-frame. Your comments will help us continue to bring you quality products.

MAN0579 (1/19/2007) Installation 9