Swisher ZT2460 owner manual Introduction Congratulations, General, Read Before Operating

Page 4

INTRODUCTION

Introduction

Congratulations

Thank you for purchasing a Swisher Zero Turn mower. This machine is built for the greatest efficiency and rapid mowing of large areas. Conveniently located controls and dual commercial grade hydrostatic transmissions regulated by steering levers, contribute to the machine’s performance.

This manual is a valuable document. Following the instructions for use, service, maintenance, etc. can greatly increase the life-span of your machine .

General

In this operator’s manual, left and right, backward and forward are used in relation to the normal operators position.

 

NOTE:

 

If you have never used a Zero Turn mower before, refer to

Read Before Operating

the Operation Controls section of this manual before

attempting to operate one for the first time.

This machine is constructed only for mowing grass on lawns and other free and even ground without obstacles. This machine is not intended for commercial use. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

This machine must only be operated, maintained, and repaired by persons that are familiar with the machine’s special characteristics and who are well versed in safety instructions.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

¾Read engine manufacturer’s operating and maintenance instructions.

¾Read and observe all safety instructions on your mower and in the manual

¾Check engine oil.

¾Check fuel caps to sure that they are in place.

¾Set control handles outward – setting parking brake

¾Be sure mower blades are turned off – PTO switch pushed down.

¾Know how to stop the engine – Turn key to

off

¾Know how to stop the unit – Return control

handles to neutral

4

 

Image 4
Contents ZT2460 Limited Warranty Contents Introduction Introduction CongratulationsGeneral Read Before OperatingUncrating & Assembly To Remove The Mower From The CrateSymbols & Decals OD45- Warning DecalSymbols & Decals Decals Not ShownSafety Instructions Safety InstructionsGeneral Use Safety Instructions Slope Operation RememberOperator is Responsible forSpecifications Operator Presence System Customer ResponsibilitiesTires Battery Blade MaintenanceTo clean battery and terminals Engine Overall Unit Care BeltsDriving and Transport on Public Roads Maintenance Schedule Features OperationOperation Operation Starting Grass Height & Cutting SuggestionsControls Control HandlesAdjusting The Cutting Height Service & AdjustmentsDeck Leveling Deck Belt Routing & Replacement RemovalHydro Belt Routing & Replacement Seat Adjustment Engine to Deck BeltParking Brakes Wiring Harness Parts Breakdown Not Shown 1112 3329 NB596 Center Driver Item # Description 27 10 Troubleshooting Vibration When turningNot Travel in a Straight line Battery will UnevenUnauthorized Replacement Parts Mower IdentificationQuick Reference Maintenance Log Swisher History