Sterling Plumbing 7114 Series manual Troubleshooting, Termine la instalación

Page 31

Termine la instalación (cont.)

Instale la guarnición de la grifería, el surtidor de la bañera y demás accesorios según las instrucciones de cada fabricante.

Retire la cubierta protectora de la bañera.

Abra las líneas de suministro de agua, luego haga circular agua para eliminar la suciedad de las tuberías.

Cierre las válvulas.

Instale la cabeza de ducha según las instrucciones del fabricante.

Revise que no haya fugas en las conexiones.

PRECAUCIÓN: Riesgo de daños a la propiedad. Si se han taladrado o se tienen

que taladrar orificios para instalar correctamente el accesorio, recomendamos la aplicación de sellador 100% de silicona en los orificios taladrados antes de fijar el accesorio a las paredes circundantes con el fin de evitar la posibilidad de daños causados por el agua. Siga las instrucciones del fabricante del accesorio. Los accesorios mal instalados pueden causar fugas y anular la garantía.

Si corresponde, aplique sellador 100% de silicona en los orificios taladrados anteriormente en las paredes circundantes. Consulte las instrucciones del fabricante del accesorio para fijar correctamente el accesorio a las paredes circundantes.

Si corresponde, instale todos los demás accesorios conforme a las instrucciones del fabricante.

Si va a utilizar una cortina de ducha, asegúrese de instalar la barra arriba de las paredes circundantes.

Troubleshooting

This troubleshooting guide is for general aid only. An Authorized Service Representative should correct any serious problems.

Symptoms

Probable Causes

Recommended Action

1. Leakage is detected

A. Piping leaks.

A. Remove the access panel at the

under the bath.

 

drain end, if provided. Inspect the

 

 

supply piping and fittings for leaks.

 

 

Fill the bath to above the overflow

 

 

drain connection. Check the drain

 

 

and overflow connection and the

 

 

piping for leaks. Repair any piping

 

 

leaks.

 

B. Sealant or gasket

B. Loosen or remove covers or

 

failure at holes through

flanges according to the

 

finished walls or wall

manufacturer’s recommendations.

 

surrounds.

Replace any defective gaskets or

 

 

seals. Apply 100% silicone sealant or

 

 

other sealant as required.

2. Water damage at

A. Seam at finished

A. Seal the seam with 100% silicone

finished walls.

wall not sealed.

sealant according to the

 

 

manufacturer’s instructions.

 

 

 

Sterling

31

1065823-2-C

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 1065823-2-C Important Information Tools/Outils/Herramientas Before You Begin Thank You For Choosing SterlingMerci d’avoir choisi Sterling Gracias por elegir los productos de SterlingADA Considerations Before You BeginAvant de commencer Considérations ADA Avant de commencerAntes de comenzar Consideraciones de la ADA Antes de comenzarRoughing-In Construct the Framing Plan de raccordement Diagrama de instalaciónFraming Provisions Provisions cadrage Construire le cadrageConstruct the Framing For Above-the-Floor Drain BathsEstipulaciones para la estructura de postes de madera Construya la estructura de postes de maderaConstruire le cadrage Pour baignoires à drain au-dessus du solLevel the Subfloor Optional Prepare the SubfloorConstruya la estructura de postes de madera Para bañeras con desagüe arriba del nivel del pisoPrepare el subpiso Préparer le plancherNiveler le plancher optionnel Series/Séries 7114/Serie Series/Séries 7124/Serie Install the Rough PlumbingPrepare el subpiso Nivele el subpiso opcionalInstall the Rough Plumbing Installer la plomberie de raccordementInstale las tuberías de plomería Instale las tuberías de plomería Position the BathPositionner la baignoire Install a Mortar Cement Bed OptionalPosition the Bath Coloque la bañera Installer un lit de mortier OptionnelPositionner la baignoire Instale una capa de cemento mortero opcional Coloque la bañeraMunir les murs avoisinants Pre-Fit the Wall SurroundsMunir les murs avoisinants Ajuste inicial de las paredes circundantesAviso Instale primero la pared posterior End wall Optional AccessoriesPrepare the Wall Surrounds Prepare the Plumbing End WallCôté arrière du mur d’extrémité Accessoires optionnelsPréparer les murs avoisinants Préparer le mur d’extrémité de plomberieAccesorios opcionales Prepare las paredes circundantesBath Baignoire Bañera Secure the Wall SurroundsSecure the Wall Surrounds Sécuriser les murs avoisinantsFije las paredes circundantes Complete the InstallationComplete the Installation Compléter l’installationTermine la instalación Symptoms Probable Causes Recommended Action TroubleshootingTermine la instalación Síntomas Causas probables Acción recomendada Procedimiento para resolver problemasSymptômes Causes probables Action recommandée DépannageInstructions d’entretien et de nettoyage Care and Cleaning InstructionsInstrucciones de cuidado y limpieza WarrantyGarantía GarantieÉsta es nuestra garantía exclusiva por escrito Garantía

7114 Series specifications

The Sterling Plumbing 7114 Series is a standout line that brings together quality, functionality, and modern design to meet the needs of various bathroom styles. This series is known for its durability and practicality, making it a favored choice among homeowners and professionals alike.

One of the main features of the 7114 Series is its sleek, contemporary design. The lines are clean and minimalistic, ensuring that the products seamlessly fit into modern bathroom aesthetics. The series typically includes fixtures such as faucets, showerheads, and other essential components that not only enhance usability but also elevate the overall look of the space.

In terms of technology, the Sterling 7114 Series is equipped with innovative water-saving features that help reduce water consumption without compromising performance. These fixtures often come with aerators or flow restrictors that ensure a steady stream of water while conserving gallons per minute. This efficiency is not only beneficial for the environment but also helps reduce water bills for homeowners.

Another characteristic that sets this series apart is its ease of installation. Designed with user-friendliness in mind, many products within the 7114 Series feature straightforward mounting and connection options, making it easier for plumbers and DIY enthusiasts to install them. This accessibility has earned the 7114 Series a reputation for being a reliable choice for both new constructions and renovation projects.

Durability is also a notable feature of the Sterling Plumbing 7114 Series. Many fixtures are crafted from high-quality materials, such as solid brass and corrosion-resistant finishes, ensuring they can withstand the rigors of daily use. The finishes are often designed to resist tarnishing and scratching, allowing the products to maintain their aesthetic appeal over time.

Additionally, the Sterling 7114 Series provides a variety of options to suit individual tastes and needs. Customers can choose from different finish options, including polished chrome, brushed nickel, and more, allowing for a custom look that complements their unique bathroom design.

In conclusion, the Sterling Plumbing 7114 Series excels in blending style, technology, and practicality. With its modern aesthetics, innovative water-saving technologies, durability, and ease of installation, it remains a top choice for those looking to enhance their bathroom experience. Whether for a complete remodel or a simple upgrade, the 7114 Series stands out as a trusted option in bathroom plumbing solutions.
Top Page Image Contents