Stanley Black & Decker CH2 owner manual Assembly, Remove the chipper from its carton

Page 12

Assembly

1

2

3

6

4

5

Figure 1

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to fill the engine with gasoline and oil as instructed before operating your machine.

1. Remove the chipper from its carton

Remove plastic banding and cut the tape on the top of the box.

Required tools: Two 13mm wrenches

NOTE: Both wrenches are supplied in the hardware bag.

Approximate assembly time: 15 minutes

2. Remove the shipping frame (item 6) from item 1 above

The steel shipping frame (item 6) is banded to the base of the chipper at the engine mounting location. Cut these bands with scissors or a knife to remove the chipper from the shipping frame.

The shipping frame can be discarded.

3.Verify all chipper components are present (Figure 1) Item 1: Engine/chipper body/wheels subassembly

Item 2: Lower leaf funnel section

Item 3: Upper leaf funnel section with entry shield

Item 4: Handle section and leaf funnel base

Item 5: Discharge chute with deflector

NOTE: Fill out and submit missing parts request form on page 4 should any parts be missing.

4.Verify all parts are in the hardware bag (Figure 2)

∙ Goggles (eye protection)

∙ Wrenches for assembly and blade maintenance ∙ Allen wrench for blade maintenance

∙ Oil funnel with flexible neck ∙ Spark plug wrench

∙ Owner’s Manual

∙ Hardware: eleven 20mm long bolts, two 30mm long bolts, two 45mm long bolts, 26 flat washers, 4 locking washers and 11 nylon locking nuts

Figure 2

Bolt Identification:

Place top of bolt head here

 

 

 

 

20mm

 

30mm

45mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC.

 

No part of this publication can be printed or copied without written permission.

Rev2.5-15-12

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Chipper/Shredder with 2-Way Feed Location of PurchaseRemain with the chipper/shredder if resold Contents Carbon Monoxide GAS Training Model #Component Identification Missing Parts Request Form Please indicate the part that you are missingComments Component Identification Stanley CH2 Chipper Shredder Spare Parts Diagram Stanley CH7 Chipper Shredder Spare Parts DiagramDescription Safety Information Safety Label LocationsSafety Information Operator Responsibility Your ResponsibilityOperating Guidelines YOU Proceed ANY FurtherAssembly Remove the chipper from its cartonRemove the shipping frame item 6 from item 1 above Verify all parts are in the hardware bag FigureRe-connect the spark plug wire Add oil and fuel Attaching the chipper discharge chute FigureAttaching the lower leaf funnel section. Figure Leaf funnel with entry shieldImportant Engine Information Emission Control System InformationCarbon Monoxide Gas Fire and Burn HazardsUsing the Chipper Shredder Operating InstructionsStarting the Engine Add gasolineMaintenance and Storage Removing and Sharpening the Limb Chute Blades Cleaning the Chipper/Shredder Removing and replacing the flail hammersTo Change the Oil Storing the Chipper/ShredderTroubleshooting Problem Cause RemedyLimited Warranty and Service Engine Months

CH2 specifications

Stanley Black & Decker CH2 is a groundbreaking product that has carved a niche for itself within the tool and construction industry. This advanced tool is crafted for professionals seeking efficiency and unparalleled performance in their projects. At the heart of the CH2's design is its commitment to high-quality engineering and user-focused features, making it an ideal choice for contractors and DIY enthusiasts alike.

One of the standout features of the Stanley Black & Decker CH2 is its dual-mode functionality, allowing users to toggle between various modes tailored for different applications. This versatility enhances productivity, making it a multipurpose tool that can handle everything from drilling to fastening tasks with ease. The CH2 is equipped with a powerful brushless motor that not only ensures longer operational life but also optimizes energy consumption and performance.

Another technological advancement found in the CH2 is its advanced electronic feedback system. This technology enables real-time monitoring of the tool's performance, ensuring that it maintains consistent torque and prevents overload situations. This leads to improved accuracy in tasks and enhances the overall safety of users.

The Stanley Black & Decker CH2 also incorporates an ergonomic design, featuring a lightweight construction that minimizes fatigue during extended use. The handle is perfectly contoured to fit comfortably in the user's grip, and the additional rubberized grip provides enhanced control, thereby reducing the risk of slips or drops.

For maximum efficiency, the CH2 includes an integrated LED work light that illuminates work surfaces, a feature that is especially useful in low-light conditions. This thoughtful inclusion allows users to maintain visibility and precision, ensuring that every task is completed to the highest standard.

Moreover, compatibility with Stanley Black & Decker’s extensive range of accessories and batteries allows users to seamlessly transition between different tasks without the hassle of changing tools or recharging batteries frequently. The CH2 stands as a testament to Stanley Black & Decker's commitment to innovation, clarity, and user convenience.

Overall, the Stanley Black & Decker CH2 represents a leap forward in tool technology, combining state-of-the-art features with the reliability that professionals have come to expect from the brand. Whether you are on a construction site or tackling a home improvement project, the CH2 is designed to meet diverse demands with power and precision, making it an invaluable addition to any toolkit.
Top Page Image Contents