Stanley Black & Decker CH2 owner manual Removing and Sharpening the Limb Chute Blades

Page 17

Maintenance and Storage

Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine.

Removing and Sharpening the Limb Chute Blades

The chipper was shipped with two blades attached spare blades are sold in sets from GXi (Part Number LCSSP11-018)

1.Disconnect the spark plug wire and ground against the engine.

2.Remove limb chute by removing the four nyloc nuts that attach the limb chute to the flail housing using the 13mm wrench provided in the hardware bag (do not use the thin stamped steel wrench)

3.Remove the lower section and upper section of the funnel as a subassembly. This is done by removing three bolts with the 13mm wrenches provided in the hardware bag.

4.Remove the blade using an Allen wrench on the outside of the blade through the limb chute opening, and a 13mm wrench through the leaf funnel opening to remove the three fasteners from each blade.

After removing one blade, turn the rotor by hand until the second blade is visible through the limb chute opening.

5.Replace or sharpen the blade.

6.When sharpening the blade, protect hands by using gloves and follow the original angle of grind. Torque to 21-25 Ft lbs.

NOTE: Make certain the blade is reassembled with the

sharp edge facing down. (The long edge of the blade will be toward the limb chute.) Always sharpen or replace blades in sets to ensure smooth operation.

WARNING: All guards, chutes, and fasteners must be assembled in their proper locations before attempting to start the chipper shredder.

Step 4

Step 3

Step 2

 

STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC.

 

No part of this publication can be printed or copied without written permission.

Rev2.5-15-12

14

Image 17
Contents Location of Purchase Chipper/Shredder with 2-Way FeedRemain with the chipper/shredder if resold Contents Carbon Monoxide GAS Model # TrainingComponent Identification Comments Missing Parts Request FormPlease indicate the part that you are missing Component Identification Description Stanley CH2 Chipper Shredder Spare Parts DiagramStanley CH7 Chipper Shredder Spare Parts Diagram Safety Label Locations Safety InformationSafety Information Operator Responsibility Your ResponsibilityYOU Proceed ANY Further Operating GuidelinesRemove the chipper from its carton AssemblyRemove the shipping frame item 6 from item 1 above Verify all parts are in the hardware bag FigureAttaching the chipper discharge chute Figure Re-connect the spark plug wire Add oil and fuelAttaching the lower leaf funnel section. Figure Leaf funnel with entry shieldEmission Control System Information Important Engine InformationCarbon Monoxide Gas Fire and Burn HazardsOperating Instructions Using the Chipper ShredderStarting the Engine Add gasolineMaintenance and Storage Removing and Sharpening the Limb Chute Blades Removing and replacing the flail hammers Cleaning the Chipper/ShredderTo Change the Oil Storing the Chipper/ShredderProblem Cause Remedy TroubleshootingEngine Months Limited Warranty and Service

CH2 specifications

Stanley Black & Decker CH2 is a groundbreaking product that has carved a niche for itself within the tool and construction industry. This advanced tool is crafted for professionals seeking efficiency and unparalleled performance in their projects. At the heart of the CH2's design is its commitment to high-quality engineering and user-focused features, making it an ideal choice for contractors and DIY enthusiasts alike.

One of the standout features of the Stanley Black & Decker CH2 is its dual-mode functionality, allowing users to toggle between various modes tailored for different applications. This versatility enhances productivity, making it a multipurpose tool that can handle everything from drilling to fastening tasks with ease. The CH2 is equipped with a powerful brushless motor that not only ensures longer operational life but also optimizes energy consumption and performance.

Another technological advancement found in the CH2 is its advanced electronic feedback system. This technology enables real-time monitoring of the tool's performance, ensuring that it maintains consistent torque and prevents overload situations. This leads to improved accuracy in tasks and enhances the overall safety of users.

The Stanley Black & Decker CH2 also incorporates an ergonomic design, featuring a lightweight construction that minimizes fatigue during extended use. The handle is perfectly contoured to fit comfortably in the user's grip, and the additional rubberized grip provides enhanced control, thereby reducing the risk of slips or drops.

For maximum efficiency, the CH2 includes an integrated LED work light that illuminates work surfaces, a feature that is especially useful in low-light conditions. This thoughtful inclusion allows users to maintain visibility and precision, ensuring that every task is completed to the highest standard.

Moreover, compatibility with Stanley Black & Decker’s extensive range of accessories and batteries allows users to seamlessly transition between different tasks without the hassle of changing tools or recharging batteries frequently. The CH2 stands as a testament to Stanley Black & Decker's commitment to innovation, clarity, and user convenience.

Overall, the Stanley Black & Decker CH2 represents a leap forward in tool technology, combining state-of-the-art features with the reliability that professionals have come to expect from the brand. Whether you are on a construction site or tackling a home improvement project, the CH2 is designed to meet diverse demands with power and precision, making it an invaluable addition to any toolkit.