Stanley Black & Decker CH2 owner manual Component Identification

Page 6

Component Identification

Discharge Chute

Chipped materials are discharged through this opening.

Fuel Tank

Use regular unleaded fuel. Always leave about 1” of air gap at the top of the tank for fuel expansion to prevent seepage or spills.

Choke Lever

Move the choke lever to the CHOKE position to prepare a cold engine for starting.

Fuel Valve

Use the fuel valve to turn fuel on and off to engine.

Hardware Bag (Not shown)

This bag contains the owner’s manual, assembly hardware, tools, safety glasses and oil fill funnel

Leaf Funnel

Use the Leaf funnel to feed leaves and branches no larger than 1/4” only.

Limb Chute

Use the Limb chute to feed longer and/or thicker pieces of yard waste into the impeller for chipping. Depending on the model #, the chipper/shredder can cut up to a 2.25” or 3” diameter piece of wood.

On/Off Switch

Set this to On before using recoil starter.

Set switch to Off to turn off engine.

Recoil Starter

The starter handle is located on the engine. Pull the starter handle to start engine.

Serial #:

Stamped on engine block between funnel and engine

If you are missing any parts, please complete the form on the next page and fax it to us at: 919-550-3277.

STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC.

No part of this publication can be printed or copied without written permission.

Rev2.5-15-12

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Chipper/Shredder with 2-Way Feed Location of PurchaseRemain with the chipper/shredder if resold Contents Carbon Monoxide GAS Training Model #Component Identification Missing Parts Request Form Please indicate the part that you are missingComments Component Identification Stanley CH2 Chipper Shredder Spare Parts Diagram Stanley CH7 Chipper Shredder Spare Parts DiagramDescription Safety Information Operator Responsibility Safety InformationSafety Label Locations Your ResponsibilityOperating Guidelines YOU Proceed ANY FurtherRemove the shipping frame item 6 from item 1 above AssemblyRemove the chipper from its carton Verify all parts are in the hardware bag FigureAttaching the lower leaf funnel section. Figure Re-connect the spark plug wire Add oil and fuelAttaching the chipper discharge chute Figure Leaf funnel with entry shieldCarbon Monoxide Gas Important Engine InformationEmission Control System Information Fire and Burn HazardsStarting the Engine Using the Chipper ShredderOperating Instructions Add gasolineMaintenance and Storage Removing and Sharpening the Limb Chute Blades To Change the Oil Cleaning the Chipper/ShredderRemoving and replacing the flail hammers Storing the Chipper/ShredderTroubleshooting Problem Cause RemedyLimited Warranty and Service Engine Months

CH2 specifications

Stanley Black & Decker CH2 is a groundbreaking product that has carved a niche for itself within the tool and construction industry. This advanced tool is crafted for professionals seeking efficiency and unparalleled performance in their projects. At the heart of the CH2's design is its commitment to high-quality engineering and user-focused features, making it an ideal choice for contractors and DIY enthusiasts alike.

One of the standout features of the Stanley Black & Decker CH2 is its dual-mode functionality, allowing users to toggle between various modes tailored for different applications. This versatility enhances productivity, making it a multipurpose tool that can handle everything from drilling to fastening tasks with ease. The CH2 is equipped with a powerful brushless motor that not only ensures longer operational life but also optimizes energy consumption and performance.

Another technological advancement found in the CH2 is its advanced electronic feedback system. This technology enables real-time monitoring of the tool's performance, ensuring that it maintains consistent torque and prevents overload situations. This leads to improved accuracy in tasks and enhances the overall safety of users.

The Stanley Black & Decker CH2 also incorporates an ergonomic design, featuring a lightweight construction that minimizes fatigue during extended use. The handle is perfectly contoured to fit comfortably in the user's grip, and the additional rubberized grip provides enhanced control, thereby reducing the risk of slips or drops.

For maximum efficiency, the CH2 includes an integrated LED work light that illuminates work surfaces, a feature that is especially useful in low-light conditions. This thoughtful inclusion allows users to maintain visibility and precision, ensuring that every task is completed to the highest standard.

Moreover, compatibility with Stanley Black & Decker’s extensive range of accessories and batteries allows users to seamlessly transition between different tasks without the hassle of changing tools or recharging batteries frequently. The CH2 stands as a testament to Stanley Black & Decker's commitment to innovation, clarity, and user convenience.

Overall, the Stanley Black & Decker CH2 represents a leap forward in tool technology, combining state-of-the-art features with the reliability that professionals have come to expect from the brand. Whether you are on a construction site or tackling a home improvement project, the CH2 is designed to meet diverse demands with power and precision, making it an invaluable addition to any toolkit.
Top Page Image Contents