Shindaiwa HT231, X7502862800 manual Use Good Judgement, HOT Surface

Page 4

NEVER transport the unit or leave it unattended with the engine running. An engine that’s running could be acci- dently accelerated causing the blades to move.

Make sure that the blade cover is in place when transporting or storing the hedge trimmer.

ALWAYS make sure that the cutter attachment and all handles and guards are properly installed and firmly tight- ened before operation.

Inspect for broken, missing or improp- erly installed parts or attachments. NEVER use a cracked or warped cutter or cutter bar: replace it with a service- able one and make sure it fits properly. Make sure there are no missing or loose fasteners, and that the stop switch and throttle controls are working properly.

Make sure there is always good ventila- tion when operating the hedge trimmer. Fumes from engine exhaust can cause serious injury or death. NEVER run the engine indoors!

WARNING!

Use Good Judgement

NEVER smoke or light fires near the hedge trimmer. Keep the unit away from excessive heat. Engine fuel is very flammable and fire could lead to serious personal injury or property damage.

Do not operate this machine with the muf- fler removed.

NEVER attempt cutter adjustment with the engine running!

Before starting the engine, make sure the cutter is not contacting anything. ALWAYS confirm safe operation when using the machine.

Immediately stop the engine with the stop switch if the machine suddenly begins to vibrate or shake.

ALWAYS stop the engine immediately and check for damage if you strike a foreign object or if the machine becomes tangled. Do not oper- ate with broken or damaged equipment.

When cutting a branch that is under ten- sion, be alert for spring-back so that you will not be struck by the moving branch.

If a cutter should bind fast in a cut, shut off the engine immedi- ately. Push the branch or tree to ease the bind and free the cutter. ALWAYS stop the engine and allow it to cool before refuelling. Avoid overfilling and wipe off any fuel that may have spilled. To reduce fire hazard, keep the engine and muffler free of debris, leaves, or excessive grease.

KEEP A SOLID STANCE Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Safety devices and labels

ON-OFF Switch

HOT SURFACE

 

Throttle

Interlock

CAUTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

READ AND

WEAR EYE

THE BLADES

KEEPS HANDS

FOLLOW THE

AND HEARING

ARE SHARP!

CLEAR OF

INSTRUCTIONS PROTECTION

HANDLE WITH

CUTTER

IN THE

AT ALL TIMES

CARE.

BLADES WHEN

OPERATORS

DURING

 

 

STARING THE

MANUAL.

OPERATION.

 

 

ENGINE.

Cover

Protector

IMPORTANT!

Caution, Danger, Warning, and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are avail- able from your local authorized Shindaiwa dealer.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents HT231 Hedge Trimmer X7502862800 02/10Contents IntroductionSafety Safety and operation labelsWork Safely Use Good Judgement HOT SurfaceOperating the Hedge Trim USE Extreme CautionProduct Description Do not alter this machine or any of its componentsEmission Control exhaust & evaporative SpecificationsEPA 2010 and Later and/or C.A.R.B. Tier Mixing Fuel Fuel RequirementsAfter use Filling the fuel tankSlowly remove the fuel cap only after stopping the engine Starting the Engine When the motor starts Started a flooded engineStarting a Flooded Engine If the engine does not startStopping the engine Throttle free play adjustmentOperation Maintenance Intervals MaintenanceFuel Filter Air FilterSpark Plug Exhaust System Cooling SystemAdjusting engine idle Carburetor AdjustmentIdle Speed Adjustment Engine Break-InCutter blade adjustment Gearcase lubricationLong Term Storage Troubleshooting Guide What To Check Possible Cause RemedyEngine is rough at all Speeds. May also have Black smoke and/orUnburned fuel at Exhaust Engine is knockingSymptom Possible Cause Remedy Poor accelerationEngine stops abruptly Excessive vibrationExceptions 99922201031 02/05/2010 99922201033 Page Page Page Servicing Information Parts/Serial NumberCortasetos HT231 Contenido IntroducciónDeclaraciones De Seguridad Etiquetas informativas sobre seguridad y funcionamiento SeguridadTrabaje con cuidado Mantengase AlertaUse Buen Juicio Etiquetas de seguridadSeguridad continuación Precauciones de operacionesDescripción del Producto Especificaciones Control de emisiones escape y evaporativoMezcla de Combustible Ejemplos de cantidades de mezcla a proporción deLlenando el Tanque de Combustible Arranque del motor¡PRECAUCIÓN Parada del Motor Cuando el motor enciendeSiel motor no enciende Arranque de un Motor AhogadoMantenimiento OperaciónHolgura del Gatillo de Aceleración Sistema Intervalos de mantenimientoHoras Usar Filtro de aire Filtro de combustibleBujía Retire y reemplace el elemento del filtroSystème de escape Ajuste del carburador Systema de enfriamientoAjuste de la Marcha Mínima Cada 60 horas CuchillasAlmacenamiento Prolongado Guia Diagnostico Qué revisarPosible causa RemedioGuia Diagnostico continuación Baja PotenciaOtros Problemas Responsabilidad DE Echo 99922201031 02/05/2010 01/2010 Notas Notas Notas Información de servicio Piezas/número de serie

HT231, X7502862800 specifications

The Shindaiwa X7502862800, HT231 is a powerful hedge trimmer designed for both professional landscapers and passionate garden enthusiasts. This innovative tool boasts a blend of robust power, ergonomic design, and advanced technology, making it a standout choice for precision cutting and efficient performance.

One of the main features of the HT231 is its high-performance engine. The hedge trimmer is equipped with a 21.2cc pure-fire engine that provides exceptional cutting power while maintaining a lightweight structure. This engine reduces emissions and fuel consumption, adhering to strict environmental standards. The balance between power and efficiency ensures that users can tackle even the toughest hedges without the fatigue that often accompanies prolonged use of heavier equipment.

Ergonomics play a crucial role in the design of the HT231. The trimmer features an adjustable rear handle, allowing for comfortable operation at various angles. This flexibility makes it easy to reach tall hedges or navigate around intricate landscaping without straining the user's wrists or arms. Coupled with lightweight construction, the design minimizes user fatigue, enabling longer working sessions without discomfort.

The blade system of the Shindaiwa HT231 is engineered for precision and durability. The double-sided blades are laser-cut and fully hardened, ensuring clean cuts while reducing the risk of blade damage. With a cutting capacity of up to 3/4 inch, this hedge trimmer can tackle a wide range of foliage, from delicate shrubs to tougher branches.

Another notable feature is the anti-vibration technology incorporated into the HT231. This technology minimizes vibration during operation, leading to enhanced user comfort and improved control. As a result, gardeners and professionals can maintain accuracy in their cuts while reducing the physical toll of extended usage.

Maintenance is also simplified with this model. The air filter is readily accessible, allowing for quick cleaning and replacement, which helps to prolong engine life and maintain performance. Additionally, the tool's design facilitates easy access to spark plugs and other key components, making routine maintenance straightforward.

In summary, the Shindaiwa X7502862800, HT231 is a versatile hedge trimmer that combines power, comfort, and efficiency in its design. With its robust engine, adjustable handling, durable blades, and user-friendly maintenance features, it is an excellent choice for anyone seeking reliability and precision in their landscaping efforts. Whether for professional or personal use, the HT231 stands out as a superior choice in the realm of hedge trimming tools.
Top Page Image Contents