Shindaiwa T230 manual General Safety Instructions The Properly Equipped Operator, Stay Alert

Page 3

General Safety Instructions The Properly Equipped Operator

Stay Alert

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never operate power equipment of any kind

if you are tired or if you are under the influence of alcohol, drugs, medication or any other substance that could affect your ability or judgement.

WARNING!

Minimize the Risk of Fire!

NEVER smoke or light fires near the unit.

ALWAYS stop the engine and allow it to cool before refueling. Avoid overfill­ ing and wipe off any fuel that may have spilled.

ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be re­ paired before using the unit.

ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materials before starting the engine.

NEVER place flammable material close to the engine muffler.

Wear hearing protection devices and a

broad-brimmed hat or helmet.

Wear close-fitting

clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery or underbrush. Secure

long hair so that

it is above shoulder level. NEVER wear shorts!

Keep a proper footing

and do not overreach. Maintain your balance at all times during operation.

Always wear eye protection such as goggles or safety glasses to shield against thrown objects.

Always wear a harness when operating a unit equipped with a blade.

Always operate with both hands firmly gripping the unit.

When operating with a blade, make sure the handle is positioned to provide you with maximum protection from contacting the blade.

Keep away from the rotating trimmer line or blade at all times, and never lift a moving attachment above waist-high.

NEVER run the engine without the spark arrester screen in place.

Wear appropriate footwear (non-skid

Always make sure the appropriate

cutting attachment shield is correctly

boots or shoes): do not wear open-toed

installed and in good condition.

shoes or sandals. Never work bare-

 

footed!

 

Figure 1

Image 3
Contents T230 Grass Trimmer T230X Grass Trimmer C230 Brushcutter Contents General Safety InstructionsIntroduction General Safety Instructions The Properly Equipped Operator Stay AlertMinimize the Risk of Fire Be Aware of the Working Environment all units Safety LabelsSpecifications Prior to AssemblyUnit Description Assembly Handle Assembly Driveshaft/Powerhead All ModelsRemove the Cylinder Cover Assembly Handlebar C230Assembly Throttle Linkage and Ignition Leads All Models Assemble the HandlebarAssemble and Adjust Throttle Cable To Change Position Line Cutter Sub-Shield T230X and C230Mount the Blade Assembly Trimmer Head C230/T230/T230XAssembly Blade C230/T230X Install the Trimmer HeadMixing Fuel Filling the Fuel TankExamples of 501 mixing quantities When the Engine Starts Starting the EngineStopping the Engine Adjusting Engine Idle Checking Unit ConditionShoulder Strap Edging Using a Grass Trimmer T230Engine Operating Speeds Trimming and Mowing GrassBrushcutter Harness Using a Brushcutter Blade C230/T230XBlade Thrust Brushcutter HandlebarGeneral Maintenance Daily MaintenanceHour Maintenance Every 50 hours of operation 10/15-Hour Maintenance23055 Shindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladePossible Cause Troubleshooting GuideSymptom Possible Cause Remedy Manufacturers Warranty Coverage
Related manuals
Manual 20 pages 29.68 Kb