Safety Labels
READ THE
OPERATOR’S MANUAL
WEAR HEARING AND ANSI Z87.1
APPROVED EYE PROTECTION
50 FEET
(15m)
KEEP BYSTANDERS AWAY AT LEAST 50 FEET (15m)
BEWARE OF THROWN OR
RICOCHETED OBJECTS
DO NOT OPERATE THIS
MACHINE WITH A BLADE
Shindaiwa Inc. |
IMPORTANT!
Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer.
T230
This label indicates the minimum distance between front handle and rear grip per ANSI B175.3.
T230X
C230
Figure 2
Be Aware of the Working Environment (all units)
Avoid
in very hot or very cold
weather.
Be extremely
careful of
slippery terrain, especially during rainy weather.
If contact is made with a hard object, stop the engine and inspect the cutting attachment for damage.
Be constantly alert for objects and debris that could be thrown either from the rotating cutting attachment or bounced from a hard surface.
Figure 3
Make sure bystanders or observers outside the
50
FEET
Reduce the risk of
bystanders being struck by flying debris. Make sure no one is within 50 feet (15
| Beware of a coasting blade when brushcutting |
| or edging. A coasting blade can injure while |
Always make sure | it continues to spin after the throttle trigger is |
released or after the engine is stopped. | |
the appropriate cutting |
|
attachment shield is |
|
correctly installed. |
|
ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander. When operating in rocky terrain
26105or near electric wires or fences, use extreme caution to avoid contacting such items with the cutting attachment.