Shindaiwa 81645 manual Replacing the Edger Blade, Long Term Storage

Page 14

Replacing the Edger Blade

WARNING!

Always wear gloves when handling the edger blade.

1.Align the hole in holder A with the matching hole in the gearcase and then use the hex wrench to temporarily lock the output shaft.

2.Use the combination wrench to loosen the shaft bolt then remove the output shaft bolt, Holder B and the edger blade from the gearcase.

3.Mount the edger blade and holder B onto the shaft, and then install the bolt guard and shaft bolt (turn bolt counter- clockwise to install). See Figure 26.

4.Align the hole in holder A with the matching hole in the gearcase, and then use the hex wrench to temporarily lock the output shaft. See Figure 26.

5.Use the combination wrench to firmly tighten the shaft bolt. Remove the hex wrench. See Figure 26.

Holder A

Bolt

 

 

Guard

Output Shaft

26118

Bolt

Holder B

 

Lock the

Edger

shaft

 

Blade

Figure 26

 

Long Term Storage

Whenever the unit will not be used for 30 days or longer, use the following proce- dures to prepare it for storage:

nClean external parts thoroughly.

nDrain all the fuel from the fuel tank.

IMPORTANT!

All stored fuels should be stabilized with a fuel stabilizer such as STA-BIL™, if

oil with fuel stabilizer is not used.

nRemove the remaining fuel from the fuel lines and carburetor.

CAUTION!

Gasoline stored in the carburetor for extended periods can cause hard starting and could also lead to increased service and maintenance cost.

1.Prime the primer bulb until no more fuel is passing through.

2.Start and run the engine until it stops running.

3.Repeat steps 1 and 2 until the engine will no longer start.

nRemove the spark plug and pour about 1/4 ounce of 2-cycle mixing oil into the cylinder through the spark plug hole.

Slowly pull the recoil starter 2 or 3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug.

nBefore storing the unit, repair or replace any worn or damaged parts.

nRemove the air cleaner element from the carburetor and clean it thoroughly with soap and water. Let dry and reassemble the element.

nStore the unit in a clean, dust-free area.

14

Image 14
Contents LE242 Lawn Edger Introduction Safety InstructionsContents Safety Instructions Properly Equipped Operator Use Good JudgmentSafety Labels Be Aware of the Working EnvironmentProduct Description SpecificationsPrior to Assembly Adjust Throttle Lever Free Play Assembly and Adjustments Install Gearcase AssemblyAssembly and Adjustments Reinstall the air cleaner coverExamples of 501 mixing quantities Mixing FuelFilling the Fuel Tank Starting the Engine Slide the ignition switch to the on position. See FigureWhen the Engine Starts Checking Unit Condition Idle Speed AdjustmentStopping the Engine Use only authorized Shindaiwa partsTo adjust blade height Using a Hand-held EdgerAdjusting the Cutting Depth Guidelines for Operating the EdgerHour Maintenance General MaintenanceDaily Maintenance Lubricate the Flexible Shaft 10/15-Hour MaintenanceEvery 10 to 15 hours of operation Dealer Inspect the Gearcase ProtectorWith an authorized Shindaiwa servicing Replacing the Edger Blade Long Term StorageTroubleshooting Guide Engine does not StartAdditional Problems Manufacturers Warranty Coverage Page Hiroshima Ku,-Asaminami Com.shindaiwa.wwwJapan73-167,3 Nishi-Ozuka-611,2 Oregon TualatinGarantía DE Servicio DE Solicitudes Continuación Diagnostico Guia Adicionales ProblemasDiagnostico Guia Potencia BajaEstabilizador con Plazo Largo de AlmacenamientoOrilladora la de Cuchilla la Reemplazar Engranajes de Caja la de Protector el Inspeccione Mantenimiento horas 135 CadaContinuación Horas 50 Cada Mantenimiento Precaución Horas 50 Cada MantenimientoHoras 10/15 Cada Mantenimiento Sujetadores Diario MantenimientoGeneral Mantenimiento BujíaShindaiwa marca de lador Oril para cuchillas sólo Utilice Corte del Profundidad la AjustandoMano de Orillador el Utilizando Cuchilla de altura la ajustar ParaMotor del Parada Unidad la de Condición la VerifiqueMotor del Mínima Marcha de Ajuste Encendido Motor del Arranque…motor el arranca Cuando De proporción Combustible de Tanque el LlenandoCombustible de Mezcla Aire de filtro del tapa la Reinstale Acelerador del Holgura la Ajuste Ajustes y EnsamblajeEngranaje de Caja la de Instalación Seguridad de tuercas las AprieteDe normal operación la durante operador EspecificacionesEnsamblar de Antes Autorizadas no teraciones Al o modificaciones haga NoSeguridad de Etiquetas Trabajo de Area del Alerta EstéJuicio Buen Use ¡ADVERTENCIA Descalzo! máquina laDe Riesgo El Disminuya ContenidoIncendios Cuidado con TrabajeRev 81645 pieza de Número

81645 specifications

The Shindaiwa 81645 is a powerful and versatile tool designed for professional landscapers and gardeners who rely on performance and durability. This product excels in providing efficient power and productivity for a variety of landscaping tasks, making it a favored choice among outdoor maintenance professionals.

One of the key features of the Shindaiwa 81645 is its powerful engine. It is equipped with a high-performance 25.4cc 2-stroke engine that delivers robust power and reliability. This engine not only provides the necessary strength for cutting through dense brush and tough weeds but also operates efficiently to minimize fuel consumption. The combination of power and efficiency is essential for those who spend long hours in the field.

Durability is another hallmark of the Shindaiwa 81645. Built with professional-grade materials, this product can withstand the rigors of daily use in demanding environments. The unit's rugged construction, combined with its advanced vibration dampening technology, ensures that operators experience reduced fatigue, allowing for longer work sessions without discomfort.

The Shindaiwa 81645 also features an ergonomic design, making it comfortable to handle. The adjustable harness allows customization for a secure fit, distributing the weight evenly across the operator's body. This attention to user comfort promotes better handling and control of the tool, leading to improved efficiency and results.

One of the standout technologies integrated into the Shindaiwa 81645 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is particularly beneficial in cold weather or when the equipment has not been used for an extended period. Additionally, the tool includes a heavy-duty cutting head that is designed to handle various mowing applications, from trimming grass to tackling thicker underbrush.

Furthermore, the Shindaiwa 81645 boasts a low emissions design, in line with eco-friendly standards. This makes it an environmentally conscious option for professionals who are mindful of their carbon footprint while still demanding high performance from their equipment.

In summary, the Shindaiwa 81645 is a robust tool that merges power, durability, and user-friendly features. With its powerful engine, ergonomic design, and advanced technologies, it stands as a premier choice for landscaping professionals seeking efficiency and reliability in their day-to-day operations. Whether trimming grass or clearing brush, the Shindaiwa 81645 delivers the performance needed to tackle any outdoor challenge.