Shindaiwa 81645 manual Mixing Fuel, Filling the Fuel Tank, Examples of 501 mixing quantities

Page 7

Mixing Fuel

CAUTION!

Some types of gasoline contain alcohol as an oxygenate. Oxygenated gaso- line may cause increased operating temperatures. Under certain condi- tions, alcohol-based gasoline may also reduce the lubricating qualities of some 2-cycle mixing oils. Never use any type of gasoline containing more than 10% alcohol by volume! Generic oils and some outboard oils may not be intended for use in high-performance

2-cycle engines, and should never be used in your Shindaiwa engine.

CAUTION!

This engine is designed to operate on a 50:1 mixture consisting of unleaded gasoline and ISO-L-EGD or JASO FC class 2-cycle mixing oil only. Use of non-approved mixing oils can lead to excessive carbon deposits.

nUse only fresh, clean unleaded gasoline with a pump octane of 87 or higher.

nMix all fuel with a 2-cycle air-cooled mix- ing oil that meets or exceeds ISO-L-EGD and/or JASO FC classified oils at 50:1 gasoline/oil ratio.

Examples of 50:1 mixing quantities

n1 gallon of gasoline to 2.6 oz. mixing oil

n5 liters of gasoline to 100 ml. mixing oil

IMPORTANT!

Mix only enough fuel for your immediate needs! If fuel must be stored longer than

30 days and oil with fuel stabilizer is not used, it should first be treated with a fuel stabilizer such as STA-BIL™.

Oil is a registered JASO FC clas- sified oil and also meets or exceeds ISO-L- EGD performance requirements. Shindaiwa One is recommended for use in all Shindaiwa low emissions engines.Shindaiwa One also includes a fuel stabilizer.

Filling the Fuel Tank

WARNING!

 

 

Minimize the risk of fire!

n NEVER start or operate this unit if

n STOP engine before refueling.

 

the carburetor, fuel lines, fuel tank

 

and/or fuel tank cap are damaged.

n ALWAYS allow the engine to cool

 

n

NEVER smoke or light any fires

before refueling!

 

near the engine or fuel source!

n Wipe all spilled fuel and move the

 

n

NEVER place any flammable ma-

engine at least 10 feet (3 meters)

 

terial near the engine muffler!

from the fueling point and source

 

n

NEVER operate the engine with-

before restarting!

n NEVER start or operate this unit if

 

out the muffler and spark arrester

there is a fuel leak.

in good working condition.

 

1.Place the edger on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents LE242 Lawn Edger Contents Safety InstructionsIntroduction Use Good Judgment Safety Instructions Properly Equipped OperatorBe Aware of the Working Environment Safety LabelsPrior to Assembly SpecificationsProduct Description Reinstall the air cleaner cover Assembly and Adjustments Install Gearcase AssemblyAssembly and Adjustments Adjust Throttle Lever Free PlayFilling the Fuel Tank Mixing FuelExamples of 501 mixing quantities When the Engine Starts Slide the ignition switch to the on position. See FigureStarting the Engine Use only authorized Shindaiwa parts Idle Speed AdjustmentStopping the Engine Checking Unit ConditionGuidelines for Operating the Edger Using a Hand-held EdgerAdjusting the Cutting Depth To adjust blade heightDaily Maintenance General MaintenanceHour Maintenance Every 10 to 15 hours of operation 10/15-Hour MaintenanceLubricate the Flexible Shaft With an authorized Shindaiwa servicing Inspect the Gearcase ProtectorDealer Long Term Storage Replacing the Edger BladeEngine does not Start Troubleshooting GuideAdditional Problems Manufacturers Warranty Coverage Page Nishi-Ozuka-611,2 Oregon Tualatin Com.shindaiwa.wwwJapan73-167,3 Hiroshima Ku,-AsaminamiGarantía DE Servicio DE Solicitudes Adicionales Problemas Continuación Diagnostico GuiaPotencia Baja Diagnostico GuiaOrilladora la de Cuchilla la Reemplazar Plazo Largo de AlmacenamientoEstabilizador con Continuación Horas 50 Cada Mantenimiento Mantenimiento horas 135 CadaEngranajes de Caja la de Protector el Inspeccione Horas 10/15 Cada Mantenimiento Horas 50 Cada MantenimientoPrecaución Bujía Diario MantenimientoGeneral Mantenimiento SujetadoresCuchilla de altura la ajustar Para Corte del Profundidad la AjustandoMano de Orillador el Utilizando Shindaiwa marca de lador Oril para cuchillas sólo UtiliceMotor del Mínima Marcha de Ajuste Unidad la de Condición la VerifiqueMotor del Parada …motor el arranca Cuando Motor del ArranqueEncendido Combustible de Mezcla Combustible de Tanque el LlenandoDe proporción Seguridad de tuercas las Apriete Acelerador del Holgura la Ajuste Ajustes y EnsamblajeEngranaje de Caja la de Instalación Aire de filtro del tapa la ReinstaleAutorizadas no teraciones Al o modificaciones haga No EspecificacionesEnsamblar de Antes De normal operación la durante operadorTrabajo de Area del Alerta Esté Seguridad de EtiquetasDescalzo! máquina la Juicio Buen Use ¡ADVERTENCIACuidado con Trabaje ContenidoIncendios De Riesgo El DisminuyaRev 81645 pieza de Número

81645 specifications

The Shindaiwa 81645 is a powerful and versatile tool designed for professional landscapers and gardeners who rely on performance and durability. This product excels in providing efficient power and productivity for a variety of landscaping tasks, making it a favored choice among outdoor maintenance professionals.

One of the key features of the Shindaiwa 81645 is its powerful engine. It is equipped with a high-performance 25.4cc 2-stroke engine that delivers robust power and reliability. This engine not only provides the necessary strength for cutting through dense brush and tough weeds but also operates efficiently to minimize fuel consumption. The combination of power and efficiency is essential for those who spend long hours in the field.

Durability is another hallmark of the Shindaiwa 81645. Built with professional-grade materials, this product can withstand the rigors of daily use in demanding environments. The unit's rugged construction, combined with its advanced vibration dampening technology, ensures that operators experience reduced fatigue, allowing for longer work sessions without discomfort.

The Shindaiwa 81645 also features an ergonomic design, making it comfortable to handle. The adjustable harness allows customization for a secure fit, distributing the weight evenly across the operator's body. This attention to user comfort promotes better handling and control of the tool, leading to improved efficiency and results.

One of the standout technologies integrated into the Shindaiwa 81645 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is particularly beneficial in cold weather or when the equipment has not been used for an extended period. Additionally, the tool includes a heavy-duty cutting head that is designed to handle various mowing applications, from trimming grass to tackling thicker underbrush.

Furthermore, the Shindaiwa 81645 boasts a low emissions design, in line with eco-friendly standards. This makes it an environmentally conscious option for professionals who are mindful of their carbon footprint while still demanding high performance from their equipment.

In summary, the Shindaiwa 81645 is a robust tool that merges power, durability, and user-friendly features. With its powerful engine, ergonomic design, and advanced technologies, it stands as a premier choice for landscaping professionals seeking efficiency and reliability in their day-to-day operations. Whether trimming grass or clearing brush, the Shindaiwa 81645 delivers the performance needed to tackle any outdoor challenge.
Top Page Image Contents