Shindaiwa 81645 manual Assembly and Adjustments Install Gearcase Assembly

Page 6

Assembly and Adjustments

Install Gearcase Assembly

Figure 5

1.Loosen gearcase clamp screw.

2.Remove the gearcase index screw.

3.Slide the gearcase oriented as shown in Figure 5 onto the shaft tube insuring that the flex drive is engaged in the gearcase.

NOTE:

It may be necessary to pull the flex cable out from the shaft tube, engage into the gearcase and then slide the assembly onto the shaft tube.

4.Reinstall the index screw and tighten securely.

5.Tighten the clamp screw and torque to 52 – 69 inch pounds.

Assembly and Adjustments

Adjust Throttle Lever Free Play

The throttle lever free play should be ap- proximately 3/16-1/4 inch (4-6 mm). See Figure 6. Make sure that the throttle lever operates smoothly without binding.

If it becomes necessary to adjust the lever free play, follow the procedures and illustra- tions that follow.

 

 

 

 

 

 

251043

3/16-1/4 inch (4-6 mm)

 

 

 

Figure 6

 

Throttle Free Play

 

 

 

 

 

 

Figure 7

1.Loosen the air cleaner cover knob and remove the air cleaner cover.

See Figure 7.

2.Loosen the lock nut on the cable ad- juster. See Figure 8.

3.Turn the cable adjuster in or out as required to obtain proper free play 3/16-1/4 inch (4-6 mm). See Figure 8.

4.Tighten the locknut.

Cable

Lock

Adjuster

Nut

Figure 8

 

5. Reinstall the air cleaner cover.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LE242 Lawn Edger Safety Instructions ContentsIntroduction Safety Instructions Properly Equipped Operator Use Good JudgmentSafety Labels Be Aware of the Working EnvironmentSpecifications Prior to AssemblyProduct Description Adjust Throttle Lever Free Play Assembly and Adjustments Install Gearcase AssemblyAssembly and Adjustments Reinstall the air cleaner coverMixing Fuel Filling the Fuel TankExamples of 501 mixing quantities Slide the ignition switch to the on position. See Figure When the Engine StartsStarting the Engine Checking Unit Condition Idle Speed AdjustmentStopping the Engine Use only authorized Shindaiwa partsTo adjust blade height Using a Hand-held EdgerAdjusting the Cutting Depth Guidelines for Operating the EdgerGeneral Maintenance Daily MaintenanceHour Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operationLubricate the Flexible Shaft Inspect the Gearcase Protector With an authorized Shindaiwa servicingDealer Replacing the Edger Blade Long Term StorageTroubleshooting Guide Engine does not StartAdditional Problems Manufacturers Warranty Coverage Page Hiroshima Ku,-Asaminami Com.shindaiwa.wwwJapan73-167,3 Nishi-Ozuka-611,2 Oregon TualatinGarantía DE Servicio DE Solicitudes Continuación Diagnostico Guia Adicionales ProblemasDiagnostico Guia Potencia BajaPlazo Largo de Almacenamiento Orilladora la de Cuchilla la ReemplazarEstabilizador con Mantenimiento horas 135 Cada Continuación Horas 50 Cada MantenimientoEngranajes de Caja la de Protector el Inspeccione Horas 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoPrecaución Sujetadores Diario MantenimientoGeneral Mantenimiento BujíaShindaiwa marca de lador Oril para cuchillas sólo Utilice Corte del Profundidad la AjustandoMano de Orillador el Utilizando Cuchilla de altura la ajustar ParaUnidad la de Condición la Verifique Motor del Mínima Marcha de AjusteMotor del Parada Motor del Arranque …motor el arranca CuandoEncendido Combustible de Tanque el Llenando Combustible de MezclaDe proporción Aire de filtro del tapa la Reinstale Acelerador del Holgura la Ajuste Ajustes y EnsamblajeEngranaje de Caja la de Instalación Seguridad de tuercas las AprieteDe normal operación la durante operador EspecificacionesEnsamblar de Antes Autorizadas no teraciones Al o modificaciones haga NoSeguridad de Etiquetas Trabajo de Area del Alerta EstéJuicio Buen Use ¡ADVERTENCIA Descalzo! máquina laDe Riesgo El Disminuya ContenidoIncendios Cuidado con TrabajeRev 81645 pieza de Número

81645 specifications

The Shindaiwa 81645 is a powerful and versatile tool designed for professional landscapers and gardeners who rely on performance and durability. This product excels in providing efficient power and productivity for a variety of landscaping tasks, making it a favored choice among outdoor maintenance professionals.

One of the key features of the Shindaiwa 81645 is its powerful engine. It is equipped with a high-performance 25.4cc 2-stroke engine that delivers robust power and reliability. This engine not only provides the necessary strength for cutting through dense brush and tough weeds but also operates efficiently to minimize fuel consumption. The combination of power and efficiency is essential for those who spend long hours in the field.

Durability is another hallmark of the Shindaiwa 81645. Built with professional-grade materials, this product can withstand the rigors of daily use in demanding environments. The unit's rugged construction, combined with its advanced vibration dampening technology, ensures that operators experience reduced fatigue, allowing for longer work sessions without discomfort.

The Shindaiwa 81645 also features an ergonomic design, making it comfortable to handle. The adjustable harness allows customization for a secure fit, distributing the weight evenly across the operator's body. This attention to user comfort promotes better handling and control of the tool, leading to improved efficiency and results.

One of the standout technologies integrated into the Shindaiwa 81645 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is particularly beneficial in cold weather or when the equipment has not been used for an extended period. Additionally, the tool includes a heavy-duty cutting head that is designed to handle various mowing applications, from trimming grass to tackling thicker underbrush.

Furthermore, the Shindaiwa 81645 boasts a low emissions design, in line with eco-friendly standards. This makes it an environmentally conscious option for professionals who are mindful of their carbon footprint while still demanding high performance from their equipment.

In summary, the Shindaiwa 81645 is a robust tool that merges power, durability, and user-friendly features. With its powerful engine, ergonomic design, and advanced technologies, it stands as a premier choice for landscaping professionals seeking efficiency and reliability in their day-to-day operations. Whether trimming grass or clearing brush, the Shindaiwa 81645 delivers the performance needed to tackle any outdoor challenge.
Top Page Image Contents