Shindaiwa C344, X7502831700 manual Handling Fuel, Mixing Instructions, After use

Page 11

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improp- erly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the re- quired amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-

off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building,

away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents C344 Brushcutter Introduction ContentsStay Alert SafetySafety Labels Work SafelyBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsEmission Control Exhaust & Evaporative AssemblyPrior to Assembly Handlebar Assembly Install the handlebarInstall Cutting Attachment Shield Blade Installation Assembly Mixing Fuel Assembly Install BladeAfter use Handling FuelMixing Instructions Minimize the Risk of Fire Filling the fuel tankStarting the Engine Starting a Flooded Engine When the Engine StartsStopping the Engine Checking Unit ConditionOperation Brushcutter Shoulder Strap Using a bladeBlade Thrust Brushcutter HandlebarMaintenance Hour maintenance Gearcase lubrication Hour maintenance More frequently in dusty conditionsValve Adjustment Hour maintenance Remove and replace the fuel filter elementHour Maintenance High Altitude Operation Carburetor AdjustmentMuffler and spark arrester maintenance Engine Break-InMultiple-tooth Circular Blade Adjusting Engine IdleIdle Speed Adjustment Blade SharpeningLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page T15213001001/T15213999999 Servicing Information

C344, X7502831700 specifications

The Shindaiwa X7502831700, C344 is an exceptional piece of equipment designed for landscaping and forestry professionals who demand reliability and performance. This product is part of Shindaiwa's broad portfolio of high-quality outdoor power tools. It stands out for its robust construction, efficient design, and a range of features that enhance usability and effectiveness.

One of the key features of the X7502831700 is its powerful engine, which provides ample torque and power for various applications, from trimming hedges to tackling thick brush. The engine is engineered for efficiency, ensuring that users can complete their tasks without frequent refueling. This not only saves time but also reduces operational costs, making it an ideal choice for professionals who work long hours.

The C344 model incorporates advanced vibration dampening technology. This is crucial for extended use, as it minimizes operator fatigue and maximizes comfort. The ergonomic design of the handle also promotes ease of use, allowing users to maneuver the equipment efficiently without strain. This attention to user experience enhances productivity on the job site.

Additionally, the Shindaiwa X7502831700 comes equipped with a high-quality cutting system that ensures precision and clean cuts. The materials used in the construction of the cutting components are durable, designed to withstand the rigors of tough outdoor conditions. This resilience translates to a longer lifespan for the equipment, which is a significant consideration for anyone investing in professional-grade tools.

Safety features are another highlight of the C344 model. It includes an easy-start system that reduces the effort required to start the engine, along with protective guards that enhance safety during operation. These features help ensure that users can focus on their tasks with peace of mind.

In conclusion, the Shindaiwa X7502831700, C344 is a powerful and reliable tool that meets the needs of demanding professionals in landscaping and forestry. With its robust engine, ergonomic design, advanced vibration dampening technology, and high-quality cutting system, it stands out as a preferred choice for those seeking performance and durability in their outdoor power tools. Whether you are a professional landscaper or a serious hobbyist, the C344 can help you achieve outstanding results in your outdoor projects.
Top Page Image Contents