Shindaiwa C344, X7502831700 manual Hour maintenance More frequently in dusty conditions

Page 17

Maintenance (continued)

10-Hour maintenance

(more frequently in dusty conditions)

1.Remove the air filter cover by loos- ening the cover screw(s) and lifting.

2.Remove and inspect the pre-filter. If the pre-filter is torn or otherwise damaged, replace it with a new one.

3.Clean the pre-filter with soap and water. Let dry before reinstalling.

4.Inspect the air filter element. If the element is damaged or distorted, replace it with a new one.

5.Tap filter gently on a hard surface to dislodge debris from element or use compressed air from the inside to blow debris out and away from the air filter element.

6.Install the air filter element, pre-filter and cover in the reverse order of removal.

Loosen

fasteners

Remove the cover of the air filter

IMPORTANT!

Direct the air stream at the inside face of the filter only!

Prefilter

Filter element

Components of air filter

CAUTION!

Never operate the unit if the air cleaner assembly is damaged or missing!

10/15-Hour maintenance

 

Remove and clean or replace the

 

spark plug.

Clean the spark

■■Clean the spark plug. Adjust elec-

plug and check

the gap at the

trode gap according to the values

electrode.

listed in the ”Specifications” section. If

 

the spark plug must be replaced, use

 

only the type recommended in ”Spec-

0,6 mm

ifications” or equivalent resistor type

(0.024 in)

spark plug of the correct heat range.

 

CAUTION!

 

Before removing the spark plug,

 

clean the area around the plug to

 

prevent dirt and debris from getting

Remove and inspect spark plug

into the engine’s internal parts.

50-hour maintenance

A

Gearcase lubrication

 

1.Clean all loose debris from gear box.

2.Remove plug (A) and check level of grease. Grease should fill gear case to bottom of grease plug hole.

3.Add grease if necessary using manual grease gun or squeeze-type tube.

Do not use high pressure grease gun. DO NOT over-fill.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents C344 Brushcutter Introduction ContentsSafety Labels SafetyWork Safely Stay AlertBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsPrior to Assembly AssemblyHandlebar Assembly Install the handlebar Emission Control Exhaust & EvaporativeInstall Cutting Attachment Shield Blade Installation Assembly Mixing Fuel Assembly Install BladeAfter use Handling FuelMixing Instructions Minimize the Risk of Fire Filling the fuel tankStarting the Engine Stopping the Engine When the Engine StartsChecking Unit Condition Starting a Flooded EngineOperation Blade Thrust Using a bladeBrushcutter Handlebar Brushcutter Shoulder StrapMaintenance Hour maintenance Gearcase lubrication Hour maintenance More frequently in dusty conditionsValve Adjustment Hour maintenance Remove and replace the fuel filter elementHour Maintenance Muffler and spark arrester maintenance Carburetor AdjustmentEngine Break-In High Altitude OperationIdle Speed Adjustment Adjusting Engine IdleBlade Sharpening Multiple-tooth Circular BladeLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page T15213001001/T15213999999 Servicing Information

C344, X7502831700 specifications

The Shindaiwa X7502831700, C344 is an exceptional piece of equipment designed for landscaping and forestry professionals who demand reliability and performance. This product is part of Shindaiwa's broad portfolio of high-quality outdoor power tools. It stands out for its robust construction, efficient design, and a range of features that enhance usability and effectiveness.

One of the key features of the X7502831700 is its powerful engine, which provides ample torque and power for various applications, from trimming hedges to tackling thick brush. The engine is engineered for efficiency, ensuring that users can complete their tasks without frequent refueling. This not only saves time but also reduces operational costs, making it an ideal choice for professionals who work long hours.

The C344 model incorporates advanced vibration dampening technology. This is crucial for extended use, as it minimizes operator fatigue and maximizes comfort. The ergonomic design of the handle also promotes ease of use, allowing users to maneuver the equipment efficiently without strain. This attention to user experience enhances productivity on the job site.

Additionally, the Shindaiwa X7502831700 comes equipped with a high-quality cutting system that ensures precision and clean cuts. The materials used in the construction of the cutting components are durable, designed to withstand the rigors of tough outdoor conditions. This resilience translates to a longer lifespan for the equipment, which is a significant consideration for anyone investing in professional-grade tools.

Safety features are another highlight of the C344 model. It includes an easy-start system that reduces the effort required to start the engine, along with protective guards that enhance safety during operation. These features help ensure that users can focus on their tasks with peace of mind.

In conclusion, the Shindaiwa X7502831700, C344 is a powerful and reliable tool that meets the needs of demanding professionals in landscaping and forestry. With its robust engine, ergonomic design, advanced vibration dampening technology, and high-quality cutting system, it stands out as a preferred choice for those seeking performance and durability in their outdoor power tools. Whether you are a professional landscaper or a serious hobbyist, the C344 can help you achieve outstanding results in your outdoor projects.
Top Page Image Contents