Shindaiwa X7502831700, C344 manual Emission Control Exhaust & Evaporative, Prior to Assembly

Page 6

Emission Control (Exhaust & Evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only.

An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en- gine FAMILY).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

Assembly

This unit comes fully assembled with the exception of the handlebar, cut- ting attachment shield and cutting attachment.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal

Prior to Assembly

Before assembling, make sure you have all the components required for a complete unit and inspect unit and components for any damage.

■■Engine/Outer tube assembly

■■Handlebar and Throttle assembly ■■Cutting attachment shields

■■Cutting Attachment

■■Shoulder Strap w/Hip Pad

■■Cutting attachment shield mounting brackets and assembly hardware

■■Cutting attachment adapter plates

■■4 mm hex key wrench (Also use as a locking tool)

operation.

Handlebar Assembly

Install the handlebar:

1.Remove four (4) upper cap retaining screws, and remove upper cap from handlebar mounting bracket.

2.Place handlebar on mounting bracket, and secure with upper cap and four (4) screws.

3.Adjust handlebar position for best operator comfort and control, then tighten upper and lower cap retain- ing screws securely.

4.Secure cable to outer tube with two

(2) bands provided.

 

 

■■T-wrench

 

Throttle lock

Ignition switch

 

 

 

 

button

 

 

 

 

 

Throttle interlock

 

Throttle

 

 

 

trigger

 

Handlebar

 

Throttle

 

Handle bar

 

 

Upper cap

Assembly

 

 

 

retaining screws

 

Handle positioning

Upper

Hanger

 

label

cap

 

Outer tube

 

 

 

Lower cap

 

 

 

retaining

 

 

 

screws

 

Bands

 

 

 

 

 

Lower cap

Mounting the brushcutter handlebar

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents C344 Brushcutter Contents IntroductionWork Safely SafetySafety Labels Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionHandlebar Assembly Install the handlebar AssemblyPrior to Assembly Emission Control Exhaust & EvaporativeInstall Cutting Attachment Shield Blade Installation Assembly Assembly Install Blade Mixing FuelHandling Fuel Mixing InstructionsAfter use Filling the fuel tank Starting the EngineMinimize the Risk of Fire Checking Unit Condition When the Engine StartsStopping the Engine Starting a Flooded EngineOperation Brushcutter Handlebar Using a bladeBlade Thrust Brushcutter Shoulder StrapMaintenance Hour maintenance More frequently in dusty conditions Hour maintenance Gearcase lubricationHour maintenance Remove and replace the fuel filter element Hour MaintenanceValve Adjustment Engine Break-In Carburetor AdjustmentMuffler and spark arrester maintenance High Altitude OperationBlade Sharpening Adjusting Engine IdleIdle Speed Adjustment Multiple-tooth Circular BladeLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page Servicing Information T15213001001/T15213999999

C344, X7502831700 specifications

The Shindaiwa X7502831700, C344 is an exceptional piece of equipment designed for landscaping and forestry professionals who demand reliability and performance. This product is part of Shindaiwa's broad portfolio of high-quality outdoor power tools. It stands out for its robust construction, efficient design, and a range of features that enhance usability and effectiveness.

One of the key features of the X7502831700 is its powerful engine, which provides ample torque and power for various applications, from trimming hedges to tackling thick brush. The engine is engineered for efficiency, ensuring that users can complete their tasks without frequent refueling. This not only saves time but also reduces operational costs, making it an ideal choice for professionals who work long hours.

The C344 model incorporates advanced vibration dampening technology. This is crucial for extended use, as it minimizes operator fatigue and maximizes comfort. The ergonomic design of the handle also promotes ease of use, allowing users to maneuver the equipment efficiently without strain. This attention to user experience enhances productivity on the job site.

Additionally, the Shindaiwa X7502831700 comes equipped with a high-quality cutting system that ensures precision and clean cuts. The materials used in the construction of the cutting components are durable, designed to withstand the rigors of tough outdoor conditions. This resilience translates to a longer lifespan for the equipment, which is a significant consideration for anyone investing in professional-grade tools.

Safety features are another highlight of the C344 model. It includes an easy-start system that reduces the effort required to start the engine, along with protective guards that enhance safety during operation. These features help ensure that users can focus on their tasks with peace of mind.

In conclusion, the Shindaiwa X7502831700, C344 is a powerful and reliable tool that meets the needs of demanding professionals in landscaping and forestry. With its robust engine, ergonomic design, advanced vibration dampening technology, and high-quality cutting system, it stands out as a preferred choice for those seeking performance and durability in their outdoor power tools. Whether you are a professional landscaper or a serious hobbyist, the C344 can help you achieve outstanding results in your outdoor projects.
Top Page Image Contents