Shindaiwa X7502831700, C344 manual Blade Installation

Page 8

Assembly (continued)

Install trimmer head

Tools required: 4 mm hex key wrench (locking tool)

Parts required: adapter plate, trimmer head

NOTE

Use the 4 mm hexagonal wrench as a gear housing locking tool.

1.Assemble adapter plate (C) onto PTO shaft.

2.Align locking hole in adapter plate with notch in edge of gear housing and insert head locking tool (D).

3.Thread line head (E) onto shaft by turning it counter-clockwise until head is tight against adapter plate (C).

4.Remove locking tool (D).

IMPORTANT

Semi-automatic nylon line heads must be used only with plastic debris shield with cut-off knife. Using nylon line heads with metal debris shield can result in trimmer damage, caused by operation with excessive line length.

To advance trimmer line

Tip:

To advance trimmer line, tap trimmer head against the ground while the head is turning at normal operating speed.

Nylon line replacement

See Maintenance Section for Loading Trimmer Line.

Remove nylon line head

NOTE

Do not disassemble nylon line head.

D

A

C

D

E

1.Align locking hole in adapter plate with notch in edge of gear housing and insert head locking tool (D).

2.Remove line head (E) by turning it clockwise until head is completely off of shaft.

3.Remove locking tool (D).

Blade Installation

WARNING!

You must install the U-Handle and all Blade Conversion parts shown in the following instructions before operating this unit with a metal blade, otherwise serious injury may result.

NOTE

Model C344 includes U-Handle, and necessary blade conversion parts. Blades are not provided with trimmer/brushcutters and must be selected for type of cutting being performed.

Install Metal Shield

Tools Required: 8 x 10 mm Open-end Wrench, Screwdriver, 17x19 mm Wrench,

Locking Tool

Parts Required: Metal Shield, Shield Bracket,

3 - 5 x 10 mm screws w/captivated flat and lock- washer, (metal shield to gear housing).

2 - 5 x 8 mm screws, 2 - 5 mm nuts, 2 - 5 mm lock- washers, (bracket to shield).

2 - 5 mm nuts, 2 - 5 mm lockwashers (Bracket to Gear Housing)

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents C344 Brushcutter Contents IntroductionSafety Safety LabelsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAssembly Prior to AssemblyHandlebar Assembly Install the handlebar Emission Control Exhaust & EvaporativeInstall Cutting Attachment Shield Blade Installation Assembly Assembly Install Blade Mixing FuelAfter use Handling FuelMixing Instructions Minimize the Risk of Fire Filling the fuel tankStarting the Engine When the Engine Starts Stopping the EngineChecking Unit Condition Starting a Flooded EngineOperation Using a blade Blade ThrustBrushcutter Handlebar Brushcutter Shoulder StrapMaintenance Hour maintenance More frequently in dusty conditions Hour maintenance Gearcase lubricationValve Adjustment Hour maintenance Remove and replace the fuel filter elementHour Maintenance Carburetor Adjustment Muffler and spark arrester maintenanceEngine Break-In High Altitude OperationAdjusting Engine Idle Idle Speed AdjustmentBlade Sharpening Multiple-tooth Circular BladeLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page Servicing Information T15213001001/T15213999999

C344, X7502831700 specifications

The Shindaiwa X7502831700, C344 is an exceptional piece of equipment designed for landscaping and forestry professionals who demand reliability and performance. This product is part of Shindaiwa's broad portfolio of high-quality outdoor power tools. It stands out for its robust construction, efficient design, and a range of features that enhance usability and effectiveness.

One of the key features of the X7502831700 is its powerful engine, which provides ample torque and power for various applications, from trimming hedges to tackling thick brush. The engine is engineered for efficiency, ensuring that users can complete their tasks without frequent refueling. This not only saves time but also reduces operational costs, making it an ideal choice for professionals who work long hours.

The C344 model incorporates advanced vibration dampening technology. This is crucial for extended use, as it minimizes operator fatigue and maximizes comfort. The ergonomic design of the handle also promotes ease of use, allowing users to maneuver the equipment efficiently without strain. This attention to user experience enhances productivity on the job site.

Additionally, the Shindaiwa X7502831700 comes equipped with a high-quality cutting system that ensures precision and clean cuts. The materials used in the construction of the cutting components are durable, designed to withstand the rigors of tough outdoor conditions. This resilience translates to a longer lifespan for the equipment, which is a significant consideration for anyone investing in professional-grade tools.

Safety features are another highlight of the C344 model. It includes an easy-start system that reduces the effort required to start the engine, along with protective guards that enhance safety during operation. These features help ensure that users can focus on their tasks with peace of mind.

In conclusion, the Shindaiwa X7502831700, C344 is a powerful and reliable tool that meets the needs of demanding professionals in landscaping and forestry. With its robust engine, ergonomic design, advanced vibration dampening technology, and high-quality cutting system, it stands out as a preferred choice for those seeking performance and durability in their outdoor power tools. Whether you are a professional landscaper or a serious hobbyist, the C344 can help you achieve outstanding results in your outdoor projects.
Top Page Image Contents