Shindaiwa C344, X7502831700 manual Install Cutting Attachment Shield

Page 7

Assembly (continued)

Throttle Linkage and Ignition Leads

Adjust throttle trigger free play

The throttle trigger free play should be approximately 4 - 6 mm (3/16”

-1/4”). Make sure that the throttle lever operates smoothly without binding.

1.Loosen the air cleaner cover knob(s) and remove the air cleaner cover.

2.Place throttle linkage (A) through adjustment fixture (B) and install wire end into large carburetor throt- tle swivel hole (C). Check throttle for freedom of movement and that wide open throttle / low idle extremes are adjusted properly.

4-6 mm (3/16”-1/4”)

Throttle Free Play

Throttle trigger free play

3.Turn the cable adjuster in or out as required to obtain proper free play 4 - 6 mm (3/16 - 1/4 in.).

4.Connect 2 ignition stop leads from throttle cable tubing to 2 ignition leads on engine.

5.Reinstall the air cleaner cover.

Cable

B

A

C

Adjuster

Remove air cleaner cover

Install Cutting Attachment Shield

CAUTION

Wear Gloves or personal injury may result:

•Cutoff knife is sharp.

•Gearcase and surrounding area may be hot.

Tools Required: Screwdriver

Parts Required: Plastic debris shield, shield plate, (3) 5 x 10 mm screws

NOTE

The plastic shield is for use with the Nylon Line Head only. Install Metal Shield when using plastic or metal blades.

1.Remove plastic threaded shaft sleeve and adapter plate (C) from PTO shaft (A).

2.Place the shield on the bottom of the bearing housing flange.

3.Place shield plate (B) on shield, align holes. Install three (3) screws from bottom through plate and shield into gear case.

A

B

C

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents C344 Brushcutter Introduction ContentsStay Alert SafetySafety Labels Work SafelyBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsEmission Control Exhaust & Evaporative AssemblyPrior to Assembly Handlebar Assembly Install the handlebarInstall Cutting Attachment Shield Blade Installation Assembly Mixing Fuel Assembly Install BladeMixing Instructions Handling FuelAfter use Starting the Engine Filling the fuel tankMinimize the Risk of Fire Starting a Flooded Engine When the Engine StartsStopping the Engine Checking Unit ConditionOperation Brushcutter Shoulder Strap Using a bladeBlade Thrust Brushcutter HandlebarMaintenance Hour maintenance Gearcase lubrication Hour maintenance More frequently in dusty conditionsHour Maintenance Hour maintenance Remove and replace the fuel filter elementValve Adjustment High Altitude Operation Carburetor AdjustmentMuffler and spark arrester maintenance Engine Break-InMultiple-tooth Circular Blade Adjusting Engine IdleIdle Speed Adjustment Blade SharpeningLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page T15213001001/T15213999999 Servicing Information

C344, X7502831700 specifications

The Shindaiwa X7502831700, C344 is an exceptional piece of equipment designed for landscaping and forestry professionals who demand reliability and performance. This product is part of Shindaiwa's broad portfolio of high-quality outdoor power tools. It stands out for its robust construction, efficient design, and a range of features that enhance usability and effectiveness.

One of the key features of the X7502831700 is its powerful engine, which provides ample torque and power for various applications, from trimming hedges to tackling thick brush. The engine is engineered for efficiency, ensuring that users can complete their tasks without frequent refueling. This not only saves time but also reduces operational costs, making it an ideal choice for professionals who work long hours.

The C344 model incorporates advanced vibration dampening technology. This is crucial for extended use, as it minimizes operator fatigue and maximizes comfort. The ergonomic design of the handle also promotes ease of use, allowing users to maneuver the equipment efficiently without strain. This attention to user experience enhances productivity on the job site.

Additionally, the Shindaiwa X7502831700 comes equipped with a high-quality cutting system that ensures precision and clean cuts. The materials used in the construction of the cutting components are durable, designed to withstand the rigors of tough outdoor conditions. This resilience translates to a longer lifespan for the equipment, which is a significant consideration for anyone investing in professional-grade tools.

Safety features are another highlight of the C344 model. It includes an easy-start system that reduces the effort required to start the engine, along with protective guards that enhance safety during operation. These features help ensure that users can focus on their tasks with peace of mind.

In conclusion, the Shindaiwa X7502831700, C344 is a powerful and reliable tool that meets the needs of demanding professionals in landscaping and forestry. With its robust engine, ergonomic design, advanced vibration dampening technology, and high-quality cutting system, it stands out as a preferred choice for those seeking performance and durability in their outdoor power tools. Whether you are a professional landscaper or a serious hobbyist, the C344 can help you achieve outstanding results in your outdoor projects.
Top Page Image Contents