Shindaiwa 81704 manual Adjustments, Handle Bar C2510 Install the handlebar

Page 7

Assembly (Continued)

Handle Bar C2510

Install the handlebar:

1.Use the 4 mm hex wrench to remove the lower cap retaining screws from the handlebar bracket. Remove the cap from the bracket. See Figure 5.

2.Position the handle on the outer tube forward of Handle Positioning Label as shown in Figure 5. Reassemble the lower cap to the handlebar bracket in the reverse order of disassembly.

3.Locate the handle in the best position for operator comfort.

4.Firmly tighten both lower cap retaining screws.

5.Install the protector sleeve on the outer tube. See Figure 5.

Throttle

Trigger

Outer Tube

Figure 5

Handle Positioning Label

Ignition Switch

POSITION HANDLE

FORWARD OF THIS LINE

Shoulder Strap	Hanger	Protector Sleeve
Shoulder Strap

Handlebar

Mounting Bracket

Socket-Head

Cap Screw

C2510

Adjustments

Adjust Throttle Lever Free Play

The throttle lever free play should be ap- proximately 3/16-1/4 inch (4-6 mm). See Figure 6. Make sure that the throttle lever operates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illustrations that follow.

3/16-1/4 inch

(4-6 mm)

Throttle Free

Play

Figure 6

Figure 7

1.Remove the air cleaner cover by loosen- ing the two thumbscrews. See Figure 7.

2.Loosen the lock nut on the cable ad- juster. See Figure 8.

3.Turn the cable adjuster in or out as required to obtain proper free play 3/16-1/4 inch (4-6 mm). See Figure 8.

4.Tighten the lock nut.

Cable

Adjuster

Figure 8	Lock Nut

5. Reinstall the air cleaner cover.

Image 7

Contents C2510 C2510 BrushcutterSafety Instructions ContentsIntroduction Always use the proper cutting tool for the job Properly Equipped OperatorBe Aware of the Working Environment Safety LabelsPrior to Assembly Specifications C2510Product Description Sub-Shield C2510 AssemblyInstall the Cutting Attachment Shield C2510 Cutting Attachment ShieldReinstall the air cleaner cover AdjustmentsHandle Bar C2510 Install the handlebar Adjust Throttle Lever Free PlayGear Case Shaft Installing a Trimmer HeadRemove the hex wrench Installing a BladeExamples of 501 mixing quantities Mixing FuelFilling the Fuel Tank Starting the EngineStopping the Engine Adjusting Engine IdleWhen the Engine Starts Idle Speed AdjustmentShoulder Strap C2510 Checking Unit ConditionCutting Grass-Units equipped with a trimmer head Operating Units with a Blade Using a Blade C2510Daily Maintenance General MaintenanceHour Maintenance Every 10 to 15 hours of operation 10/15-Hour MaintenanceSpark Arrester Screen Maintenance 139/150-Hour MaintenanceMultiple-tooth Circular Blade Long Term StorageBlade Sharpening Shindaiwa Tornado BladeEngine does not Start Troubleshooting GuideAdditional Problems Manufacturers Warranty Coverage Garantía DE Servicio DE Solicitudes Adicionales Problemas Continuación Diagnostico Guia18SP Diagnostico GuiaTornado Shindaiwa Disco Discos de AfiladoPlazo Largo de Almacenamiento Múltiples Dientes de DiscosTorsión de correctas Guardachispas Maya la de MantenimientoMantenimiento o horas 139/150 Cada Shindaiwa autorizadoHoras 10/15 Cada Mantenimiento Horas 50 Cada MantenimientoDiario Mantenimiento Horas 10 Cada MantenimientoGeneral Mantenimiento C2510 Disco un Usando Cuchilla una con Unidades OperandoUnidad la de Condición la Verifique Corte de Cabezal con Equipadas Máquinas Césped de CorteMínima Marcha de Ajuste Motor del Mínima Marcha de AjusteMotor del Parada Continuación Motor del ArranqueDe proporción a mezcla Motor del ArranqueCombustible de Tanque el Llenando Combustible de MezclaCuchilla la Instalando Nylon de Cabezal del Instalación C2510 Mango Continuación EnsamblajeSeguridad de tuercas las Apriete Acelerador del holgura la Ajuste AjustesEnsamblaje Producto del Descripción C2510 EspecificacionesEnsamblar de Antes Trabajo de Area del Alerta Esté Seguridad de EtiquetasLimpios mangos los mantenga Siempre Equipado Debidamente Operario El Seguridad de InstruccionesCuidado con Trabaje ContenidoHumana reproducción la Nocivos efectos otros u congénitos Alerta MantengaseOrador