SAFETY
WARNING! - Crushing Hazard.
-To Avoid Serious Injury or Death
Make sure attachment is securely attached to the loader. See Operator’s Manual for instructions.
-Lock both levers down. Make sure pins are adequately extended through slots at the bottom of the attachment bracket and the tapered side of pin is firmly seated against attachments slots. Make sure the gap is not larger than 1/8”.
-Tilt attachment down, lower to ground, apply down pressure, and drag backwards. Do not use attachment if it disengages.
-NEVER walk or work underneath raised loader or attachment
(Located on the Quick Attach Device Only)
P/N D516