Servis-Rhino 1485, 1480, 1495 manual Loader Storage, Transporting the Tractor and Implement

Page 82
(SG-10)
(SG-25)

OPERATION

OPERATION

Carry bales as low to the ground as possible to allow maximum visibility and avoid tipping.

8.3 Shutting Down the Implement

Park the tractor on a level surface, place the transmission in park or neutral and apply the parking brake, lower the attached implement to the ground, shut down the engine, remove the key, and wait for all motion to come to a complete stop before exiting the tractor. OPS-L- 0014

9. Loader Storage

Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Inadvertent contact with controls can cause the Implement to shift or fall crushing themselves or others.

Properly preparing and storing the loader at the end of the season is critical to maintaining its appearance and to help ensure years of dependable service. The following are suggested storage procedures:

Thoroughly clean all debris off the loader to prevent damage from rotting grass and standing water.

Lubricate all grease points detailed in the maintenance section.

Tighten all bolts and pins to the recommend torque.

Check worn and damage parts. Perform repairs and make replacements immediately so that the loader will be ready for use at the start of the next season.

Store the loader in a clean, dry place resting securely on parking stands at ground level.

Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the loader.

10. Transporting the Tractor and Implement

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.

1480/1485/1495 01/11

Operation Section 4-36

© 2011 Alamo Group Inc.

Image 82
Contents 1480/1485 1495 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices1480/1485/1495 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices Safety Safety 1480/1485/1495 01/11 Safety Section SL-33 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Safety Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introductio Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly Instructions1480/1485/1495 01/11 Assembly Section Proper Ballasting and Wheel Spacing Dismounting and Mounting Loader Dismounting LoaderAttaching Pin on Bucket Mounting LoaderInstalling Quick-Attach Device Assembling Quick-Attach DeviceWhen Connecting an Attachment to the Loader Quick Hitch Plumbing Hydraulic Valve Attaching Valve Mounting & Valve Attaching Tractor Hydraulic BlockHose Plumbing Plumbing Loader to Control ValvePage Operation Section Operation Rhino 1400 Series LoaderStandard Equipment and Specifications 1480 1485 1495Operator Requirements Operation Tractor Requirements Personal Protective Equipment PPETractor Lighting and SMV Emblem Rops and Seat BeltTractor Ballast Getting On and Off the Tractor Boarding the TractorDismounting the Tractor Starting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceLoader Pre-Operation Inspection and Service Mount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Dumping the Bucket Operating with Float Control Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Transporting the Tractor and Implement Loader StorageShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyOperation Maintenance Section Maintenance 1480/1485/1495 01/11 Maintenance Section Lubrication Schedule Daily Checks Hydraulic Pressure CheckLift and Bucket Cylinder Disassembly Hydraulic CylinderLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER 1480/1485/1495

1495, 1485, 1480 specifications

The Servis-Rhino 1480, 1485, and 1495 models are renowned in the industry for their rugged build and exceptional performance in the field of land management and agricultural operations. These innovative machines represent the pinnacle of design and engineering, catering to the diverse needs of farmers and landowners.

One of the standout features of the Servis-Rhino series is their robust construction. Built with high-quality materials, these models ensure durability and longevity, even in the harshest environments. The heavy-duty frames provide stability and support, making them ideal for intensive tasks such as brush clearing, pasture maintenance, and roadside clean-up.

In terms of technology, Servis-Rhino has incorporated advanced features that enhance ease of use and efficiency. The models come equipped with a patented blade design that promotes optimal cutting performance, allowing users to tackle thick brush and dense vegetation with ease. Additionally, their adjustable cutting heights make them versatile for various tasks, enabling operators to customize their settings based on specific requirements.

The hydraulic system integrated into the 1480, 1485, and 1495 models offers smooth and responsive operation. This feature is particularly beneficial for users who need to perform quick adjustments while working, as it minimizes downtime and maximizes productivity. The hydraulic lift capabilities further enhance efficiency by allowing operators to raise and lower the cutting equipment with minimal effort.

Another significant characteristic of these models is their compatibility with a range of tractors, thereby increasing their appeal to a broader audience. The quick-attach design ensures that users can easily connect the machines to different tractor types, reducing the need for specialized equipment and making them a valuable addition to any fleet.

Moreover, the Servis-Rhino models emphasize user comfort and safety. They often feature ergonomic controls that streamline operation and reduce fatigue during long working hours. Safety guards and shields are also included to protect operators from flying debris, ensuring that the machines can be operated safely in various environments.

In summary, the Servis-Rhino 1480, 1485, and 1495 models are designed to meet the rigorous demands of modern agricultural and land management tasks. With their sturdy construction, advanced technology, hydraulic efficiency, and user-friendly features, these machines are an indispensable tool for anyone involved in land maintenance, making them a top choice among professionals in the field.