ASSEMBLY
Assembling Quick-Attach Device
Torque all hardware to specifications listed in loader operator’s manual.
Shut off the tractor engine and engage the tractor brakes during installation.
Only quick attach, skid steer compatible attachments can be used with the quick attach device. Pin on style attachments can be used on the loader, but necessitate removal of the quick attach device and relocation of the bucket level indicator.
All references to left and right used in these instructions are as they would appear to the operator standing at the rear of the unit facing forward.
1.Quick attach device is
2.Unband the quick attach device and wood blocks. (Figure
ASSEMBLY
Installing Quick-Attach Device
1.Fasten quick attach device to lower boom arms and bucket tilt cylinders using 1” x
2.Attach bucket leveling rod indicator (supplied with loader), to outside of right ear on quick attach as shown. Figure
1480/1485/1495 01/11 | Assembly Section |
© 2011 Alamo Group Inc.