Servis-Rhino manual 1480/1485/1495 01/11 Maintenance Section

Page 91
(SG-38)
(SG-37)
(SG-34)

MAINTENANCE

Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel is spilled, move machine away from the area of the spill and avoid creating any source of ignition until the fuel has evaporated. (SBH-49)

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.

Use caution and wear protective gloves when handling sharp objects such as blades, knives, and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not worn.

Avoid contact with hot surfaces of the engine or muffler. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.

Never allow anyone to get under the loader or attachment or to reach through the loader lift arms when raised. Serious injury could result from crushing or pinching by the loader or attachment. (SL-06)

Never perform maintenance beneath a raised loader unless loader is properly supported to prevent accidental lowering.

PARTS INFORMATION

Rhino products are designed utilizing specifically matched system components to ensure optimum equipment performance. These parts are made and tested to Rhino specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce equipment performance, void warranties, and present a safety hazard. Use genuine Rhino parts for economy and safety. (SPRM-2)

SEE YOUR RHINO DEALER

1480/1485/1495 01/11

Maintenance Section 5-3

© 2011 Alamo Group Inc.

MAINTENANCE

Image 91
Contents 1480/1485 1495 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety1480/1485/1495 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices Safety Safety 1480/1485/1495 01/11 Safety Section SL-33 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Safety Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introductio Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Instructions Assembly1480/1485/1495 01/11 Assembly Section Proper Ballasting and Wheel Spacing Dismounting Loader Dismounting and Mounting LoaderMounting Loader Attaching Pin on BucketAssembling Quick-Attach Device Installing Quick-Attach DeviceWhen Connecting an Attachment to the Loader Quick Hitch Plumbing Hydraulic Valve Attaching Tractor Hydraulic Block Attaching Valve Mounting & ValvePlumbing Loader to Control Valve Hose PlumbingPage Operation Section Rhino 1400 Series Loader Operation1480 1485 1495 Standard Equipment and SpecificationsOperator Requirements Operation Personal Protective Equipment PPE Tractor RequirementsTractor Lighting and SMV Emblem Rops and Seat BeltTractor Ballast Boarding the Tractor Getting On and Off the TractorDismounting the Tractor Starting the Tractor Tractor Pre-Operation Inspection/Service Pre-Operation Inspection and ServiceLoader Pre-Operation Inspection and Service Mount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Dumping the Bucket Operating with Float Control Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Transporting the Tractor and Implement Loader StorageShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideOperation Maintenance Section Maintenance 1480/1485/1495 01/11 Maintenance Section Lubrication Schedule Hydraulic Pressure Check Daily ChecksHydraulic Cylinder Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER 1480/1485/1495

1495, 1485, 1480 specifications

The Servis-Rhino 1480, 1485, and 1495 models are renowned in the industry for their rugged build and exceptional performance in the field of land management and agricultural operations. These innovative machines represent the pinnacle of design and engineering, catering to the diverse needs of farmers and landowners.

One of the standout features of the Servis-Rhino series is their robust construction. Built with high-quality materials, these models ensure durability and longevity, even in the harshest environments. The heavy-duty frames provide stability and support, making them ideal for intensive tasks such as brush clearing, pasture maintenance, and roadside clean-up.

In terms of technology, Servis-Rhino has incorporated advanced features that enhance ease of use and efficiency. The models come equipped with a patented blade design that promotes optimal cutting performance, allowing users to tackle thick brush and dense vegetation with ease. Additionally, their adjustable cutting heights make them versatile for various tasks, enabling operators to customize their settings based on specific requirements.

The hydraulic system integrated into the 1480, 1485, and 1495 models offers smooth and responsive operation. This feature is particularly beneficial for users who need to perform quick adjustments while working, as it minimizes downtime and maximizes productivity. The hydraulic lift capabilities further enhance efficiency by allowing operators to raise and lower the cutting equipment with minimal effort.

Another significant characteristic of these models is their compatibility with a range of tractors, thereby increasing their appeal to a broader audience. The quick-attach design ensures that users can easily connect the machines to different tractor types, reducing the need for specialized equipment and making them a valuable addition to any fleet.

Moreover, the Servis-Rhino models emphasize user comfort and safety. They often feature ergonomic controls that streamline operation and reduce fatigue during long working hours. Safety guards and shields are also included to protect operators from flying debris, ensuring that the machines can be operated safely in various environments.

In summary, the Servis-Rhino 1480, 1485, and 1495 models are designed to meet the rigorous demands of modern agricultural and land management tasks. With their sturdy construction, advanced technology, hydraulic efficiency, and user-friendly features, these machines are an indispensable tool for anyone involved in land maintenance, making them a top choice among professionals in the field.