Servis-Rhino 1598 manual Maintenance and Service Safety Instructions and Practices

Page 18
(SG-8)
(SG-6)
(SG-2)
(SNPO-37)
(SL-39)
(SL-34)

SAFETY

SAFETY

Lower the loader to the bed of the truck or trailer when transporting the tractor and loader with a truck. Measure to ensure the transport height does not exceed the legal limits. Contact with overhead obstructions or power lines can cause property damage or serious injury.

In case of mechanical difficulty during operation, place the transmission in the park position, set the parking brake, shut down all power, including the PTO and the engine and remove the key. Wait until all rotating motion has stopped before dismounting. (SG-39)

Transport an empty bale spear tilted back in the vertical position to prevent unintended harm to a person, animal or object. Serious injury or death may occur from a bale spear puncture.

Never drive the power unit with the bucket or plow in the raised position. Traveling with the bucket or plow in the raised position increases the chances of colliding with overhead obstructions and making the unit more prone to tipping over.

Maintenance and Service Safety Instructions and Practices

Never interfere with factory-set hydraulic calibrations. Any change in calibration could cause a failure of the equipment and may result in injury. (SBH-13)

READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or death may occur unless care is taken to follow the warnings and instructions stated in the Safety Messages. Always use good common sense to avoid hazards.

Always maintain the safety signs in good readable condition. If the safety signs are missing, damaged, or unreadable, obtain and install replacement safety signs immediately. (SG-5)

Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the Tractor flashing warning lights and follow all local traffic regulations.

Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function.

1598 01/11

Safety Section 1-14

© 2011 Alamo Group Inc.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 1598 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices1598 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description D470 Name 1598 01/11 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly Section Assembly General InformationAssembly Proper Ballasting and Wheel Spacing Assembly Instructions Preparing Tractor Pallet Component RemovalInstalling Left and Right Midmounting Brackets Installing Manual Canister to Boom AssemblyInstalling Grille Guard Chart Port Identification Plumbing LoaderMounting Loader to Tractor Attaching Bucket to Loader Connecting Quick Attach Device Optional When Connecting an Attachment to the Loader Quick HitchPre-Operation Check Dismounting the Loader Mounting Loader Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the Tractor Boarding the TractorDismounting the Tractor Starting the Tractor Operation Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection and ServiceMount Assembly Loader Boom Assembly Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Brake and Differential Lock Setting Starting the TractorDriving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation 1598 01/11 Operation Section Operation Operating the Loader Filling the BucketOperation Lifting the Load Dumping the Bucket Lowering the Bucket Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Valve Lock Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyMaintenance Section Maintenance 1598 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER SOM-01/11 F-4257C Printed U.S.A

1598 specifications

The Servis-Rhino 1598 is a robust and high-performing piece of equipment designed for agricultural and industrial applications. Known for its durability and efficiency, this model has emerged as a vital tool for landowners, farmers, and landscapers alike.

At the heart of the Servis-Rhino 1598 is its impressive cutting ability. The mower features a 15-foot cutting width, enabling users to cover large areas quickly and efficiently. This makes it ideal for cutting grass, weeds, and brush in both pastureland and overgrown areas. The heavy-duty design allows it to handle challenging terrains, making the 1598 a reliable choice in various conditions.

One of the standout features of the Servis-Rhino 1598 is its superior build quality. Constructed with high-strength materials, the mower can withstand heavy use and harsh environmental factors. The cutting deck is reinforced to prevent wear and tear, ensuring longevity and consistent performance over time.

The technology behind the Servis-Rhino 1598 includes an advanced cutting system. Its rotary blade design ensures a clean cut, promoting healthier grass growth. The user can also adjust the cutting height easily, accommodating different types of vegetation and landscape requirements. This flexibility in operation allows users to optimize their mowing tasks effectively.

Another significant feature is the ease of operation. The mower is designed with user comfort in mind, featuring a smooth-rolling transport system that simplifies movement from job to job. The intuitive control layout ensures that operators can maneuver with precision, even in tight spaces.

Additionally, the Servis-Rhino 1598 is equipped with safety features that enhance operational security. These include shielded blades and an emergency stop function, ensuring that the mower operates safely around people and livestock.

Overall, the Servis-Rhino 1598 stands out in the market as a high-quality, efficient, and durable mower, with features and technologies that design it for optimal agricultural and landscaping performance. Whether tackling bushy fields or maintaining expansive lawns, this mower delivers reliable results that meet the needs of modern land management. Its combination of cutting efficiency, durability, and user-friendly operation makes it a must-have for anyone in the agricultural sector.
Top Page Image Contents