Servis-Rhino 1598 manual Operation

Page 72
(SL-16)
(SL-15)
(SL-12)

OPERATION

OPERATION

Carry the loader and attachment low when transporting to reduce the potential of the tractor tipping over. Transport on slopes only at slow speeds and use gradual turning angles. Tractor wheel contact with any wash out, drop off or ground obstruction with a raised loader could result in the tractor tipping over and causing serious injury.

Do not work from the loader or attachments. Do now allow any riders on the loader, tractor or attachments. Falling off the loader could result in serious injury and/or tractor run over. (SL-14)

Do not use an attachment that is not securely attached to the quick hitch, The attachment could fall resulting in severe crushing injuries or death to the operator or bystanders.

•Rotate both hitch pin levers down to the locked position. You should feel a firm resistance when locking the levers down. The pins must extend through the slots in the bottom of the attachment bracket.

•Examine the fit between the quick hitch and the bottom of the attachment bracket. The pins must extend through the slots in the bottom of the attachment bracket. The tapered side of each pin must be firmly wedged against the surface of the slot on the bottom of the attachment bracket. The attachment bucket should fit snugly against the bottom of the quick hitch bracket. If there is a gap of more than 1/8” or if the pins are not firmly seated do not use the attachment. Contact your dealer before using the attachment.

•On level ground, tilt the attachment down 90° degrees and lower it to the ground. Lower the loader further to slightly raise the front of the tractor off the ground. Drive the tractor in reverse while the attachment is on the ground for 20-30 feet to ensure the attachment does not disconnect. If the attachment disconnects during this process, discontinue the use of the attachment and contact your dealer.

NEVER walk or work under or allow any person to be underneath a raised loader or attachment.

Do not operate the loader from the ground. Operate the tractor and loader only while seated in the tractor seat with the seatbelt fastened. The loader could fall crushing a person resulting in serious injury or death.

1598 01/11

Operation Section 4-22

© 2011 Alamo Group Inc.

Page 71 Page 73
Image 72
Page 71 Page 73
Contents 1598 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices1598 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description D470 Name 1598 01/11 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly Section Assembly General InformationAssembly Proper Ballasting and Wheel Spacing Assembly Instructions Preparing Tractor Pallet Component RemovalInstalling Left and Right Midmounting Brackets Installing Manual Canister to Boom AssemblyInstalling Grille Guard Chart Port Identification Plumbing LoaderMounting Loader to Tractor Attaching Bucket to Loader Connecting Quick Attach Device Optional When Connecting an Attachment to the Loader Quick HitchPre-Operation Check Dismounting the Loader Mounting Loader Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the Tractor Boarding the TractorDismounting the Tractor Starting the Tractor Operation Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection and ServiceMount Assembly Loader Boom Assembly Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Brake and Differential Lock Setting Starting the TractorDriving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation 1598 01/11 Operation Section Operation Operating the Loader Filling the BucketOperation Lifting the Load Dumping the Bucket Lowering the Bucket Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Valve Lock Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyMaintenance Section Maintenance 1598 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER SOM-01/11 F-4257C Printed U.S.A

1598 specifications

The Servis-Rhino 1598 is a robust and high-performing piece of equipment designed for agricultural and industrial applications. Known for its durability and efficiency, this model has emerged as a vital tool for landowners, farmers, and landscapers alike.

At the heart of the Servis-Rhino 1598 is its impressive cutting ability. The mower features a 15-foot cutting width, enabling users to cover large areas quickly and efficiently. This makes it ideal for cutting grass, weeds, and brush in both pastureland and overgrown areas. The heavy-duty design allows it to handle challenging terrains, making the 1598 a reliable choice in various conditions.

One of the standout features of the Servis-Rhino 1598 is its superior build quality. Constructed with high-strength materials, the mower can withstand heavy use and harsh environmental factors. The cutting deck is reinforced to prevent wear and tear, ensuring longevity and consistent performance over time.

The technology behind the Servis-Rhino 1598 includes an advanced cutting system. Its rotary blade design ensures a clean cut, promoting healthier grass growth. The user can also adjust the cutting height easily, accommodating different types of vegetation and landscape requirements. This flexibility in operation allows users to optimize their mowing tasks effectively.

Another significant feature is the ease of operation. The mower is designed with user comfort in mind, featuring a smooth-rolling transport system that simplifies movement from job to job. The intuitive control layout ensures that operators can maneuver with precision, even in tight spaces.

Additionally, the Servis-Rhino 1598 is equipped with safety features that enhance operational security. These include shielded blades and an emergency stop function, ensuring that the mower operates safely around people and livestock.

Overall, the Servis-Rhino 1598 stands out in the market as a high-quality, efficient, and durable mower, with features and technologies that design it for optimal agricultural and landscaping performance. Whether tackling bushy fields or maintaining expansive lawns, this mower delivers reliable results that meet the needs of modern land management. Its combination of cutting efficiency, durability, and user-friendly operation makes it a must-have for anyone in the agricultural sector.
Top Page Image Contents