Servis-Rhino 1598 manual Attaching Bucket to Loader

Page 45

ASSEMBLY

Attaching Bucket to Loader

To avoid injury during installation of bucket, do not allow bystanders within 10 feet of loader and bucket.

1.Locate tractor and bucket on level ground. Lower boom to the ground and extend the bucket cylinders slightly while raising the boom to provide 3” to 5” of ground clearance. Drive tractor forward to the bucket, aligning the loader’s quick attach device with the pockets on the back of the bucket.

2.While driving forward slowly to maintain contact with the bucket, lift the bucket and tilt it back until the loader’s quick attach device is seated in the bucket pockets.

3.Shut off tractor engine, set park brake. Move the bucket latching handles on the loader’s quick attach device down to the LATCH position.

4.Start the tractor and activate lift cylinders to raise bucket one or two feet. Tilt the bucket downward so that the latching mechanism is visible and inspect to make sure the pins are engaged through the latch plate on the back of the bucket. Lower the bucket to the ground and back up slowly with slight downward pressure on the bucket to make sure it remains attached.

5.Before finally tightening all mounting hardware, retract the bucket so the bottom is level with the ground and lower the bucket to the ground to apply downward pressure until the load is taken off the tractor’s front tires.

NOTE: Do not lift the tractor tires off the ground. While pressure is applied, make sure the loader mounting pins can be rotated easily.

6.Tighten all remaining hardware to the torque level shown in the General

1598 01/11

Assembly Section 3-11

© 2011 Alamo Group Inc.

ASSEMBLY

Page 44 Page 46
Image 45
Page 44 Page 46
Contents 1598 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety1598 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Decal Description D470 Name 1598 01/11 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly Section General Information AssemblyAssembly Proper Ballasting and Wheel Spacing Assembly Instructions Pallet Component Removal Preparing TractorInstalling Manual Canister to Boom Assembly Installing Left and Right Midmounting BracketsInstalling Grille Guard Plumbing Loader Chart Port IdentificationMounting Loader to Tractor Attaching Bucket to Loader When Connecting an Attachment to the Loader Quick Hitch Connecting Quick Attach Device OptionalPre-Operation Check Dismounting the Loader Mounting Loader Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the Tractor Boarding the TractorDismounting the Tractor Starting the Tractor Operation Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly Loader Boom Assembly Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Starting the Tractor Brake and Differential Lock SettingOperating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation 1598 01/11 Operation Section Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Dumping the Bucket Lowering the Bucket Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Valve Lock Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideMaintenance Section Maintenance 1598 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER SOM-01/11 F-4257C Printed U.S.A

1598 specifications

The Servis-Rhino 1598 is a robust and high-performing piece of equipment designed for agricultural and industrial applications. Known for its durability and efficiency, this model has emerged as a vital tool for landowners, farmers, and landscapers alike.

At the heart of the Servis-Rhino 1598 is its impressive cutting ability. The mower features a 15-foot cutting width, enabling users to cover large areas quickly and efficiently. This makes it ideal for cutting grass, weeds, and brush in both pastureland and overgrown areas. The heavy-duty design allows it to handle challenging terrains, making the 1598 a reliable choice in various conditions.

One of the standout features of the Servis-Rhino 1598 is its superior build quality. Constructed with high-strength materials, the mower can withstand heavy use and harsh environmental factors. The cutting deck is reinforced to prevent wear and tear, ensuring longevity and consistent performance over time.

The technology behind the Servis-Rhino 1598 includes an advanced cutting system. Its rotary blade design ensures a clean cut, promoting healthier grass growth. The user can also adjust the cutting height easily, accommodating different types of vegetation and landscape requirements. This flexibility in operation allows users to optimize their mowing tasks effectively.

Another significant feature is the ease of operation. The mower is designed with user comfort in mind, featuring a smooth-rolling transport system that simplifies movement from job to job. The intuitive control layout ensures that operators can maneuver with precision, even in tight spaces.

Additionally, the Servis-Rhino 1598 is equipped with safety features that enhance operational security. These include shielded blades and an emergency stop function, ensuring that the mower operates safely around people and livestock.

Overall, the Servis-Rhino 1598 stands out in the market as a high-quality, efficient, and durable mower, with features and technologies that design it for optimal agricultural and landscaping performance. Whether tackling bushy fields or maintaining expansive lawns, this mower delivers reliable results that meet the needs of modern land management. Its combination of cutting efficiency, durability, and user-friendly operation makes it a must-have for anyone in the agricultural sector.
Top Page Image Contents