Servis-Rhino 1598 manual Installing Left and Right Midmounting Brackets

ASSEMBLY

Installing Left and Right Midmounting Brackets

1.Unfasten valve mount from right side of tractor frame and remove spacer.

2.Lift right and midmounting bracket (1) with overhead hoist. Fasten right midmounting bracket and valve mount (1) to tractor casting and front axle housing using HHCS M16 x 40MM (7) and M16 lockwashers (9).

3.Raise lift midmounting bracket (2) with overhead hoist. Fasten left midmounting bracket (2) to tractor casting and front axle housing using HHCS M16 x 40 (7) and M16 lockwashers (9).

4.Attach back axle bar (3) to bottom of the inside of the uprights and to the back axle of the tractor using the M16 x 50 bolt, M16 washer and M16 nuts. Repeat on the other side.

Installing Manual Canister to Boom Assembly

1.Use two 1/4”-20 bolts, 1/4” washer and 1/4”-20 nut to attach canister to bracket.

2.Remove bolts (26) and washers (28) from cover (10).

3.Using bolts that were just removed, attach bracket and cover to boom assembly.

4.Ensure manual is placed in the canister.

1598 01/11 Assembly Section 3-7

© 2011 Alamo Group Inc.

ASSEMBLY