Servis-Rhino 1598 manual Safety

Page 19
(SG-37)
(SG-34)
(SG-21)
(SG-20)
(SG-15)
(SL-36)

SAFETY

Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death.

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a hazard. Do not check for leaks with your hand! High-pressure oil streams from breaks in the line could penetrate the skin and cause tissue damage including gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and remove all hydraulic pressure. Wear oil impenetrable gloves, safety glasses and use Cardboard to check for evidence of oil leaks. If you suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure.

Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running.

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel is spilled, move machine away from the area of the spill and avoid creating any source of ignition until the fuel has evaporated. (SBH-49)

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.

Use caution and wear protective gloves when handling sharp objects such as blades, knives, and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not worn.

1598 01/11

Safety Section 1-15

© 2011 Alamo Group Inc.

SAFETY

Image 19
Contents 1598 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety1598 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Decal Description D470 Name 1598 01/11 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly Section General Information AssemblyAssembly Proper Ballasting and Wheel Spacing Assembly Instructions Pallet Component Removal Preparing TractorInstalling Manual Canister to Boom Assembly Installing Left and Right Midmounting BracketsInstalling Grille Guard Plumbing Loader Chart Port IdentificationMounting Loader to Tractor Attaching Bucket to Loader When Connecting an Attachment to the Loader Quick Hitch Connecting Quick Attach Device OptionalPre-Operation Check Dismounting the Loader Mounting Loader Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Rops and Seat Belt Tractor RequirementsTractor Lighting and SMV Emblem Tractor Ballast Boarding the Tractor Getting On and Off the TractorDismounting the Tractor Starting the Tractor Operation Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly Loader Boom Assembly Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Starting the Tractor Brake and Differential Lock SettingOperating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation 1598 01/11 Operation Section Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Dumping the Bucket Lowering the Bucket Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Valve Lock Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideMaintenance Section Maintenance 1598 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER SOM-01/11 F-4257C Printed U.S.A

1598 specifications

The Servis-Rhino 1598 is a robust and high-performing piece of equipment designed for agricultural and industrial applications. Known for its durability and efficiency, this model has emerged as a vital tool for landowners, farmers, and landscapers alike.

At the heart of the Servis-Rhino 1598 is its impressive cutting ability. The mower features a 15-foot cutting width, enabling users to cover large areas quickly and efficiently. This makes it ideal for cutting grass, weeds, and brush in both pastureland and overgrown areas. The heavy-duty design allows it to handle challenging terrains, making the 1598 a reliable choice in various conditions.

One of the standout features of the Servis-Rhino 1598 is its superior build quality. Constructed with high-strength materials, the mower can withstand heavy use and harsh environmental factors. The cutting deck is reinforced to prevent wear and tear, ensuring longevity and consistent performance over time.

The technology behind the Servis-Rhino 1598 includes an advanced cutting system. Its rotary blade design ensures a clean cut, promoting healthier grass growth. The user can also adjust the cutting height easily, accommodating different types of vegetation and landscape requirements. This flexibility in operation allows users to optimize their mowing tasks effectively.

Another significant feature is the ease of operation. The mower is designed with user comfort in mind, featuring a smooth-rolling transport system that simplifies movement from job to job. The intuitive control layout ensures that operators can maneuver with precision, even in tight spaces.

Additionally, the Servis-Rhino 1598 is equipped with safety features that enhance operational security. These include shielded blades and an emergency stop function, ensuring that the mower operates safely around people and livestock.

Overall, the Servis-Rhino 1598 stands out in the market as a high-quality, efficient, and durable mower, with features and technologies that design it for optimal agricultural and landscaping performance. Whether tackling bushy fields or maintaining expansive lawns, this mower delivers reliable results that meet the needs of modern land management. Its combination of cutting efficiency, durability, and user-friendly operation makes it a must-have for anyone in the agricultural sector.