Servis-Rhino 2409TL manual SL-33

Page 14
(SL-35)
(SL-30)
(SL-29)
(SL-25)
(SL-18)

SAFETY

SAFETY

Know before you DIG. Call 888-258-0808 and request that all buried utilities locations be identified before digging in unfamiliar ground. Do not let the loader or attachment contact buried electrical power lines, utilities or gas lines. Contact with electrical power lines can result in serious bodily injury or electrocution. If the loader contacts a power line, remain in the tractor seat until the power has been shut off. Stepping off the tractor can permit electrical current to pass through the body resulting in electrocution.

Do not use loader as a jack to raise the tractor tires off the ground. The loader could fail causing the tractor and loader to fall to the ground resulting in serious injury.

Use extreme care when loading, transporting or dumping loads that impair or partially block the operator’s line of sight. Know where you are traveling. Make sure no bystanders are in the area of travel. If a bystander assists in providing guidance, make sure they are not in the path of travel. Keep all bystanders 25 feet away from travel path.

Always look behind you before backing up. Make sure you are looking in the direction of travel. A bystander could walk behind the tractor. Running into a bystander can result in serious injury or death.

Some tractors are equipped with a “Super Steer” front axle. When a loader is mounted to this type of tractor, the bucket will shift in the opposite direction from which the wheels are turned. Maximum shift will be approximately 8 inches and most noticeable when the tractor is stationary. Sudden or unexpected movement of the loader and attachment could result in serious injury to the operator or bystanders.

(SL-33)

Operate the tractor and loader only in conditions where you have clear visibility in daylight or with adequate artificial lighting. Never operate in darkness or foggy conditions where you cannot clearly see at least 100 feet in front and to the sides of the tractor. Make sure you can clearly see bystanders, ditches, steep slopes, drop-offs, overhead obstructions, power lines, and debris or obstruction in the travel path. If you are unable to clearly see these types of items discontinue operating. Contact with unseen vehicles, bystanders, obstructions, or drop-offs can cause serious injury.

Be particularly careful in transport. The Implement has raised and moved the center of gravity to the front of the Power Unit increasing the possibility of overturn and tipping forward. Turn curves or go up slopes only at low speed and using a gradual turning angle. Go up slopes with the Implement located uphill. Slow down on rough or uneven surfaces.

(SPU-2)

 

2409TL 01/11

Safety Section 1-10

 

 

© 2011 Alamo Group Inc.

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 2409TL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices2409TL 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Loader Positions 2409TL 01/11 Safety Section Loader Safety Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly Instructions2409TL 01/11 Assembly Section Proper Ballasting and Wheel Spacing Dismounting and Mounting Mid-Mount Loader Mounting LoaderAssembly Attaching Pin on Bucket Dismounting LoaderAssembly Assembling Quick Attach Device Installing Quick Attach Device Connecting Attachment When Connecting an Attachment to the Loader Quick HitchAssembly Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Lighting and SMV Emblem Tractor RequirementsRops and Seat Belt Getting On and Off the Tractor Tractor BallastBoarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007A Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and Loader Operation Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Operation Dumping the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Maintenance Section Maintenance 2409TL 01/11 Maintenance Section Adjusting Bucket Level Indicator Lubrication ScheduleDaily Maintenance Cylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly StorageMaintenance Proper Torque for Fasteners Maintenance Maintenance Rhino To the OWNER/OPERATOR/DEALER 2409TL

2409TL specifications

The Servis-Rhino 2409TL is a robust and versatile task-oriented tool designed for agricultural and landscape maintenance. This model is particularly renowned for its efficiency and reliability, making it a popular choice among farmers, landscapers, and contractors who require a dependable machine in various working conditions.

One of the defining features of the Servis-Rhino 2409TL is its heavy-duty construction. Built with high-quality materials, the chassis and frame are designed to withstand challenging environments and intensive labor. This ensures longevity and reduced maintenance costs, critical factors for professionals who rely on their equipment.

Equipped with a powerful engine, the 2409TL delivers impressive performance across a range of tasks. Its robust horsepower allows it to tackle tough terrains and dense vegetation with ease, making it suitable for both mowing and clearing applications. The machine's torque characteristics enable it to handle various implements effectively, providing operators with a versatile solution for multiple jobs.

The Servis-Rhino 2409TL also incorporates innovative technology that enhances its performance and user experience. For example, the advanced drivetrain system optimizes power transfer, improving overall efficiency and reducing energy consumption. This technology not only increases productivity but also contributes to the sustainability of farm operations by minimizing emissions.

A notable characteristic of the 2409TL is its user-friendly design. The operator station is ergonomically designed for comfort and ease of use, featuring intuitive controls that allow for smooth operation. This design minimizes operator fatigue and enhances safety during prolonged use, a crucial aspect for those working long hours in the field.

Another significant advantage is the implement versatility provided by the 2409TL. This machine is compatible with various attachments and accessories, allowing users to adapt it to specific tasks such as mowing, tilling, or raking. This adaptability makes it an invaluable asset for businesses that require multiple types of equipment to accomplish diverse projects.

In summary, the Servis-Rhino 2409TL stands out due to its heavy-duty construction, powerful engine, innovative technologies, user-friendly design, and implement versatility. These features combine to provide operators with a reliable, efficient, and versatile machine capable of tackling a wide range of tasks in agricultural and landscape maintenance. Its proven track record of performance makes it a top choice for professionals in the industry.
Top Page Image Contents