Servis-Rhino 2409TL manual Operation

Page 86
(SL-34)

OPERATION

OPERATION

Lower the loader to the bed of the truck or trailer when transporting the tractor and loader with a truck. Measure to ensure the transport height does not exceed the legal limits. Contact with overhead obstructions or power lines can cause property damage or serious injury.

In case of mechanical difficulty during operation, place the transmission in the park position, set the parking brake, shut down all power, including the PTO and the engine and remove the key. Wait until all rotating motion has stopped before dismounting. (SG-39)

Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind when you finish working in an area. Therefore, the operator must employ good judgement and safe operation practices when transporting the tractor and implement between locations. By using good judgement and following safe transport procedures, the possibility of accidents while moving between locations can be substantially minimized. OPS-L- 0031

Before transporting the tractor and loader, idle the tractor engine. When transporting, carry the loader as low as possible maintaining adequate ground clearance and visibility. Reduce tractor ground speed when transporting a load. Take extra care when traveling over rough terrain or on slopes. OPS-L-0011

Before transporting the tractor on a public roadway or boarding a trailer for transport, the tractor brake pedals should be locked together. Locking the pedals ensures that both wheels brake simultaneously while stopping, especially when making an emergency stop.

Use extreme caution and avoid hard applications of the tractor brakes when towing heavy loads at road speeds. Never tow the implement at speeds greater than 20 MPH (32 kph). OPS-U- 0018

2409TL 01/11

Operation Section 4-40

© 2011 Alamo Group Inc.

Page 85 Page 87
Image 86
Page 85 Page 87
Contents 2409TL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices2409TL 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Loader Positions 2409TL 01/11 Safety Section Loader Safety Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly Instructions2409TL 01/11 Assembly Section Proper Ballasting and Wheel Spacing Dismounting and Mounting Mid-Mount Loader Mounting LoaderAssembly Attaching Pin on Bucket Dismounting LoaderAssembly Assembling Quick Attach Device Installing Quick Attach Device Connecting Attachment When Connecting an Attachment to the Loader Quick HitchAssembly Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Lighting and SMV Emblem Tractor RequirementsRops and Seat Belt Getting On and Off the Tractor Tractor BallastBoarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007A Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and Loader Operation Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Operation Dumping the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Maintenance Section Maintenance 2409TL 01/11 Maintenance Section Adjusting Bucket Level Indicator Lubrication ScheduleDaily Maintenance Cylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly StorageMaintenance Proper Torque for Fasteners Maintenance Maintenance Rhino To the OWNER/OPERATOR/DEALER 2409TL

2409TL specifications

The Servis-Rhino 2409TL is a robust and versatile task-oriented tool designed for agricultural and landscape maintenance. This model is particularly renowned for its efficiency and reliability, making it a popular choice among farmers, landscapers, and contractors who require a dependable machine in various working conditions.

One of the defining features of the Servis-Rhino 2409TL is its heavy-duty construction. Built with high-quality materials, the chassis and frame are designed to withstand challenging environments and intensive labor. This ensures longevity and reduced maintenance costs, critical factors for professionals who rely on their equipment.

Equipped with a powerful engine, the 2409TL delivers impressive performance across a range of tasks. Its robust horsepower allows it to tackle tough terrains and dense vegetation with ease, making it suitable for both mowing and clearing applications. The machine's torque characteristics enable it to handle various implements effectively, providing operators with a versatile solution for multiple jobs.

The Servis-Rhino 2409TL also incorporates innovative technology that enhances its performance and user experience. For example, the advanced drivetrain system optimizes power transfer, improving overall efficiency and reducing energy consumption. This technology not only increases productivity but also contributes to the sustainability of farm operations by minimizing emissions.

A notable characteristic of the 2409TL is its user-friendly design. The operator station is ergonomically designed for comfort and ease of use, featuring intuitive controls that allow for smooth operation. This design minimizes operator fatigue and enhances safety during prolonged use, a crucial aspect for those working long hours in the field.

Another significant advantage is the implement versatility provided by the 2409TL. This machine is compatible with various attachments and accessories, allowing users to adapt it to specific tasks such as mowing, tilling, or raking. This adaptability makes it an invaluable asset for businesses that require multiple types of equipment to accomplish diverse projects.

In summary, the Servis-Rhino 2409TL stands out due to its heavy-duty construction, powerful engine, innovative technologies, user-friendly design, and implement versatility. These features combine to provide operators with a reliable, efficient, and versatile machine capable of tackling a wide range of tasks in agricultural and landscape maintenance. Its proven track record of performance makes it a top choice for professionals in the industry.
Top Page Image Contents