![](/images/new-backgrounds/1094428/9442897x1.webp)
OPERATION
1.Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader equipped with a 72” bucket, external hydraulic system of 12 GPM with engine operating at 2500 RPM and relief setting of 2650 PSI.
| ||
| At Bucket Pivot Point | 3890 lbs. |
| 500 mm Forward of Bucket Pivot Point | 2880 lbs. |
Lift Capacity at Full Height |
| |
| At Bucket Pivot Point | 2800 lbs. |
| 500 mm Forward of Bucket Pivot Point | 2180 lbs. |
Raising Time | 4.4 sec | |
Lowering Time | 2.9 sec | |
Bucket Dumping Time | 1.6 sec | |
Bucket Rollback Time | 1.7 sec | |
Weight w/ 72” HD Material Bucket (w/o Mounting/Valve Kit) | 790 lbs. | |
Lift Cylinder | 2.5 in | |
| Stroke | 17.69 in |
| Piston Diameter | 2.5 in |
| Rod Diameter | 1.38 in |
Bucket Cylinder | 2.0 in | |
| Stroke | 18.12 in |
| Piston Diameter | 2.0 in |
| Rod Diameter | 1.38 in |
(A) | Maximum Lift Height at Pivot Pin | 112.5” |
(B) | Maximum Height Under Bucket | 106.35” |
(C) | Clearance with Bucket Dumped | 90.5” |
(D) | Reach at Maximum Height | 17.8” |
(E) | Maximum Dump Angle | 47° |
(F) | Reach with Attachment on Ground | 63.7” |
(G) | Attachment Rollback Angle | 22.5° |
(H) | Digging Depth | 5.5” |
(I) | Overall Height in Carry Position (at Boom Arm Top) | 58.8” @ boom arm top |
(Manufacturers estimated specifications and design subject to change without notice.)
2409TL 01/11 | Operation Section |
© 2011 Alamo Group Inc.