Servis-Rhino 2409TL manual Safety

Page 15
(SL-32)
(SL-31)
(SL-22)
(STI-10)
(SL-37)
(SPU-3)

SAFETY

Never leave the Implement and Power Unit unattended while the Implement is in the raised position. Accidental operation of a lifting lever or a hydraulic failure may cause the implement to suddenly fall causing serious injury or possible death to anyone who might inadvertently be under the Implement. Lower the implement carefully to the ground. Do not put hands or feet under lifted components.

The center of gravity of a Power Unit equipped with a front-mounted Implement is shifted to the front and removes weight from the rear wheels. The Power Unit should maintain at least 25% total weight with the maximum load in the bucket or attachment on the rear wheels to prevent tipping forward, loss of steering control, and possible injury. Add counterweight if required when operating on slopes and proceed with the load uphill to prevent tipping. Reference the Power Unit’s Operator’s Manual or an authorized dealer for information on adding additional weight.

Your driving vision may be reduced or impaired by the tractor, cab, or implement. Before driving on public roadways identify any limited vision areas, and make adjustments to your operating position, mirrors, and the implement transport position so that you can clearly see the area where you will be traveling, and any traffic that may approach you. Failure to maintain adequate vision of the public roadway and traffic can result in serious injury or even death.

Make sure the hydraulic quick disconnects are fully seated into the connections. Do not use the loader if the hydraulic connection is leaking. Leaking oil could allow the loader to fall resulting in a serious crushing injury.

If the loader valve controls fail to functions properly discontinue use of the tractor and loader until the controls are properly repaired. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

Make sure all air is purged from the hydraulic system before using the loader. Air in the system can cause the loader to respond sluggishly or with unexpected movement. The air can be purged from the cylinder lines by fully cycling the cylinders several times from the fully closed to fully open position. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

SAFETY

2409TL 01/11

Safety Section 1-11

© 2011 Alamo Group Inc.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 2409TL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety2409TL 01/11 Safety Section Operator Safety Instructions and Practices Safety Equipment Operation Safety Instructions and Practices SG-36 Safety Safety SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Loader Positions 2409TL 01/11 Safety Section Loader Safety Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Instructions Assembly2409TL 01/11 Assembly Section Proper Ballasting and Wheel Spacing Mounting Loader Dismounting and Mounting Mid-Mount LoaderAssembly Dismounting Loader Attaching Pin on BucketAssembly Assembling Quick Attach Device Installing Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Connecting AttachmentAssembly Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the TractorDismounting the Tractor Boarding the TractorStarting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection/Service Tractor Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007A Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and Loader Operation Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Operation Dumping the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Maintenance Section Maintenance 2409TL 01/11 Maintenance Section Lubrication Schedule Adjusting Bucket Level IndicatorDaily Maintenance Lift and Bucket Cylinder Disassembly Cylinder ServiceStorage Lift and Bucket Cylinder ReassemblyMaintenance Proper Torque for Fasteners Maintenance Maintenance Rhino To the OWNER/OPERATOR/DEALER 2409TL

2409TL specifications

The Servis-Rhino 2409TL is a robust and versatile task-oriented tool designed for agricultural and landscape maintenance. This model is particularly renowned for its efficiency and reliability, making it a popular choice among farmers, landscapers, and contractors who require a dependable machine in various working conditions.

One of the defining features of the Servis-Rhino 2409TL is its heavy-duty construction. Built with high-quality materials, the chassis and frame are designed to withstand challenging environments and intensive labor. This ensures longevity and reduced maintenance costs, critical factors for professionals who rely on their equipment.

Equipped with a powerful engine, the 2409TL delivers impressive performance across a range of tasks. Its robust horsepower allows it to tackle tough terrains and dense vegetation with ease, making it suitable for both mowing and clearing applications. The machine's torque characteristics enable it to handle various implements effectively, providing operators with a versatile solution for multiple jobs.

The Servis-Rhino 2409TL also incorporates innovative technology that enhances its performance and user experience. For example, the advanced drivetrain system optimizes power transfer, improving overall efficiency and reducing energy consumption. This technology not only increases productivity but also contributes to the sustainability of farm operations by minimizing emissions.

A notable characteristic of the 2409TL is its user-friendly design. The operator station is ergonomically designed for comfort and ease of use, featuring intuitive controls that allow for smooth operation. This design minimizes operator fatigue and enhances safety during prolonged use, a crucial aspect for those working long hours in the field.

Another significant advantage is the implement versatility provided by the 2409TL. This machine is compatible with various attachments and accessories, allowing users to adapt it to specific tasks such as mowing, tilling, or raking. This adaptability makes it an invaluable asset for businesses that require multiple types of equipment to accomplish diverse projects.

In summary, the Servis-Rhino 2409TL stands out due to its heavy-duty construction, powerful engine, innovative technologies, user-friendly design, and implement versatility. These features combine to provide operators with a reliable, efficient, and versatile machine capable of tackling a wide range of tasks in agricultural and landscape maintenance. Its proven track record of performance makes it a top choice for professionals in the industry.
Top Page Image Contents