Emerson Process Management 5300 manual Appendix C Advanced Configuration, Safety Messages

Reference Manual

00809-0100-4530, Rev BA July 2009

Rosemount 5300 Series

Appendix C Advanced Configuration

SAFETY MESSAGES

Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-1 User Defined Upper Reference Point . . . . . . . . . . . . . . . . page C-3 Handling of Disturbances from Nozzle . . . . . . . . . . . . . . . page C-4 Threshold Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-8 Probe End Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-10 Echo Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-12 Dielectric Constant Settings . . . . . . . . . . . . . . . . . . . . . . . page C-14 Dynamic Vapor Compensation . . . . . . . . . . . . . . . . . . . . . page C-15 Signal Quality Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-20

Procedures and instructions in this section may require special precautions to ensure the safety of the personnel performing the operations. Information that raises potential safety issues is indicated by a warning symbol (). Please refer to the following safety messages before performing an operation preceded by this symbol.

Explosions could result in death or serious injury:

Verify that the operating environment of the transmitter is consistent with the appropriate hazardous locations certifications.

Before connecting a HART-based communicator in an explosive atmosphere, make sure the instruments in the loop are installed in accordance with intrinsically safe or non-incendive field wiring practices.

Do not remove the transmitter cover in explosive atmospheres when the circuit is alive.

www.rosemount.com