Emerson Process Management 5300 Specifying Measurement Units, Select the Measurement Units tab

Reference Manual

00809-0100-4530, Rev BA July 2009

Rosemount 5300 Series

2.Start Rosemount Radar Master (RRM): from the Start menu click Programs>Rosemount>Rosemount Radar Master or click the RRM icon in the MS Windows workspace.

3.If the National Instruments Communication Manager server is not running, click Yes when RRM displays a request for starting the server.

4.If the Search Device window did not appear automatically choose menu option Device>Search.

5.In the Search Device window choose communication protocol

FOUNDATION Fieldbus (if not already selected) and click the Start Scan button (click the Advanced button if you want to specify start and stop dress).

Now RRM searches for the transmitter. After a while RRM shows the transmitters found on the bus:

6.Select the desired transmitter and click OK to connect.

In the RRM Status Bar verify that RRM communicates with the transmitter:

RRM communicates with the transmitter

No communication with the transmitter

Specifying Measurement Units

Measurement units for data presentation in RRM can be specified when the RRM program is installed. Units can also be changed as follows:

1.From the View menu, choose the Application Preferences option.

2.Select the Measurement Units tab.

3.Choose the desired units for Length, Level Rate, Volume, and Temperature.

5-17