Emerson Process Management 5300 manual EN DIN Flanges14, JIS Flanges13, Connections15 Probe Type

Rosemount 5300 Series

Reference Manual

00809-0100-4530, Rev BA July 2009

EN (DIN) Flanges(14) (continued)

ID	DN80, PN100. HTHP / HP units
IE	DN80, PN160. HTHP / HP units
IF	DN80, PN250. HTHP / HP units
JA	DN100, PN16
JB	DN100, PN40
JC	DN100, PN64. HTHP / HP units
JD	DN100, PN100. HTHP / HP units
JE	DN100, PN160. HTHP / HP units
JF	DN100, PN250. HTHP / HP units
KA	DN150, PN16
JIS Flanges(13)
UA	50A, 10K
UB	50A, 20K
VA	80A, 10K
VB	80A, 20K
XA	100A, 10K
XB	100A, 20K
YA	150A, 10K
YB	150A, 20K
ZA	200A, 10K
ZB	200A, 20K
Threaded	Connections(15)	Probe Type
RA	1 ½ in. NPT thread	All
RB	1 in. NPT thread	3A, 3B, 4A, 4B, 5A, 5B, standard temperature
		and pressure
RC	2 in. NPT thread	All for standard temperature and pressure
SA	1 ½ in. BSP (G 1 ½ in.) thread	All
SB	1 in. BSP (G 1 in.) thread	3A, 3B, 4A, 4B, 5A, 5B, standard temperature
		and pressure
Tri-Clamp Fittings(15)		Probe Type
FT	1 ½ in. Tri-Clamp	4A, 5A, 5B standard temperature and pressure
AT	2 in. Tri-Clamp	4A, 4B, 5A, 5B standard temperature and
		pressure
BT	3 in. Tri-Clamp	4A, 4B, 5A, 5B standard temperature and
		pressure
CT	4 in. Tri-Clamp	4A, 4B, 5A, 5B standard temperature and
		pressure
Proprietary Flanges
TF	Fisher - proprietary 316L SST (for 249B cages) Torque Tube Flange
TT	Fisher - proprietary 316L SST (for 249C cages) Torque Tube Flange
TM	Masoneilan - proprietary 316L SST Torque Tube Flange
Special Process Connection
XX	Special Process Connection
Code	Hazardous Locations Certifications
NA	Not Applicable
Code	Options
P1	Hydrostatic testing(16)
N2	NACE material recommendation per MR 0175 (17)
LS	Long stud(18) 9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
	Standard height is 3.9 in (100 mm) for probes 5A and 5B; 5.9 in. (150 mm) for probes 6A and 6B.

A-34