Emerson Process Management 5300 manual Restart the Transmitter, View Measured Values, Backup

Rosemount 5300 Series

Reference Manual

00809-0100-4530, Rev BA July 2009

Restart the Transmitter

13. Restart the transmitter

When the transmitter is configured, it should be restarted to make sure that all configuration changes are properly activated and the transmitter performs as expected. It may take up to 60 seconds after the restart button is pressed until measurement values are updated.

View Measured Values

14.Step three in the Guided Setup lets you view measurement values in order to verify that the transmitter works correctly. If the measured values seem incorrect, configuration settings may need to be adjusted.

Backup

15.When configuration is finished, it is recommended that the configuration is saved to a backup file.

5-28