Emerson Process Management 5300 manual Volstraptablelength

Reference Manual

00809-0100-4530, Rev BA July 2009

Rosemount 5300 Series

Parameter	Index	Description
	Number
VOL_VOLUME_OFFSET	46	Use this parameter to add a volume to each calculated volume
		value. The volume can for instance correspond to a sump volume
		that you wish to add to your calculation.
VOL_STRAP_TABLE_LENGTH	47	Number of points to use in the strapping table.
VOL_STRAP_LEVEL	48	Strap value level 1-20 points
VOL_STRAP_VOLUME	49	Strap value volume 1-20 points
ECHO_REG	50	Read Echo distance, amplitude and class from gauge. The Echo
		Distance is the distance from the reference echo to the target echo
		calculated by the radar from the plot and gauge configuration.
ECHO_WRITE	51	Echo Found/False Record
PEP_STATUS	52	Probe End Projection Status
PEP_PRODUCT_DC_LIMIT	53	Probe End Projection Dielectric Constant Limit
PROBE_END_PULSE_POLARITY	54
USED_MAX_VAPOR_DC	55
REF_REFLECTOR_TYPE	56	Reference Reflector Type
VAPOR_DC_FILTER_FACTOR	57	Vapor Dielectric Constant Filter Factor
SIGNAL_QUALITY	58
MIN_SIGNAL_QUALITY	59
MAX_SIGNAL_QUALITY	60
TIME_SINCE_LAST_RESET	61
SURFACE_NOISE_MARGIN	62	Surface/Noise Margin
MIN_SURFACE_NOISE_MARGIN	63	Minimum Surface/Noise Margin
MAX_SURFACE_NOISE_MARGIN	64	Maximum Surface/Noise Margin
VAPOR_COMP_STATUS	65	Vapor Compensation Status
DEVICE_COMMAND	66
DEVICE_COMMAND_STATUS	67
RADAR_INTERNAL_TEMPERATUR	68
E_RANGE
MAX_PRESSURE	69
MAX_TEMPERATURE	70
MAX_VAPOR_DC	71	Maximum Vapor Dielectric Constant
MEAS_STATUS	72	Measurement Status
CENTERING_DISC	73
PEP_TRIM_EMPTY_FAILURE	74	Probe End Projection - Trim Empty Failure
PEP_TRIM_FILL_FAILURE	75	Probe End Projection - Fill Failure
PEP_RAW_PRODUCT_DC_EST	76	Probe End Projection - Raw Product Dielectric Constant
		Estimation
PEP_RAW_DC_EST_USED_DISTA	77
NCE
USE_PROBE_END_PROJECTION	78
USE_STATIC_PRODUCT_DC	79	Use Static Product Dielectric Constant
CALCULATE_SIGNAL_QUALITY_M	80
ETRICS
USE_VAPOR_COMPENSATION	81
SPEC_CONFIG_PEP	82	Configure Probe End Projection
SPEC_CONFIG_VC	83	Configure Vapor Compensation

H-3