Emerson Process Management 5300 manual Solid Applications, ≥ 1cm/m

Rosemount 5300 Series

Reference Manual

00809-0100-4530, Rev BA July 2009

≥1cm/m

Solid Applications

Pull the probe rope through a suitable anchoring point, e.g. a welded eye and fasten it with two clamps. It is recommended that the probe is slack in order to prevent high tensile loads.

The sag should be at least

1.5in./10 ft (1 cm/m) of the probe length.

Alternative chuck for Flexible Single Lead probes

Loosen the screws. Pull the probe rope through a suitable anchoring point, e.g. a welded eye.

Tighten the screws. The required torque and hex key dimensions:

4 mm wire: 15 Nm, 4 mm

6 mm wire: 25 Nm, 5 mm

3-24