Emerson Process Management 5300 manual Channel Definitions, Parameters Descriptions

Rosemount 5300 Series

Reference Manual

00809-0100-4530, Rev BA July 2009

Channel Definitions		Each input has an assigned channel which can be linked to the AI block. The
		channels for the Rosemount 5300 Series are the following:
Table F-1. Channel
Assignments
	Channel Name		Channel	Process variable
			Number
	Level		1	CHANNEL_RADAR_LEVEL
	Ullage		2	CHANNEL_RADAR_ULLAGE
	Level Rate		3	CHANNEL_RADAR_LEVELRATE
	Signal Strength		4	CHANNEL_RADAR_SIGNAL_STRENGTH
	Volume		5	CHANNEL_RADAR_VOLUME
	Internal Temperature		6	CHANNEL_RADAR_INTERNAL_TEMPERATURE
	Upper Product Volume		7	CHANNEL_UPPER_PRODUCT_VOLUME
	Lower Product Volume		8	CHANNEL_LOWER_ PRODUCT_VOLUME
	Interface Distance		9	CHANNEL_INTERFACE_ DISTANCE
	Upper Product Thickness		10	CHANNEL_UPPER_ PRODUCT_THICKNESS
	Interface Level		11	CHANNEL_INTERFACE_LEVEL
	Interface Level Rate		12	CHANNEL_INTERFACE_ LEVELRATE
	Interface Signal Strength		13	CHANNEL_INTERFACE_ SIGNALSTRENGTH
	Signal Quality		14	CHANNEL_SIGNAL_QUALITY
	Surface/Noise Margin		15	CHANNEL_ SURFACE_NOISE_MARGIN
	Vapor DC		16	CHANNEL_VAPOR_DC
PARAMETERS AND
DESCRIPTIONS
Table F-2. Level Transducer
Block Parameters and
Descriptions.
	Parameter		Index Number	Description
	ST_REV		1	The revision level of the static data associated with the
				function block. The revision value increments each time a
				static parameter value in the block is changed.
	TAG_DESC		2	The user description of the intended application of the block.
	STRATEGY		3	The strategy field can be used to identify grouping of blocks.
				This data is not checked or processed by the block.
	ALERT_KEY		4	The identification number of the plant unit. This information
				may be used in the host for sorting alarms, etc.
	MODE_BLK		5	The actual, target, permitted, and normal modes of the block.
				Target: The mode to “go to”
				Actual: The mode the “block is currently in”
				Permitted: Allowed modes that target may take on
				Normal: Most common mode for target
	BLOCK_ERR		6	This parameter reflects the error status associated with the
				hardware or software components associated with a block. It
				is a bit string, so that multiple errors may be shown.
	UPDATE_EVT		7	This alert is generated by any change to the static data.

F-2