Emerson Process Management 5300 manual Section, Safety Instrumented Systems 4-20 mA only

Reference Manual

00809-0100-4530, Rev BA July 2009

Rosemount 5300 Series

Section 8	Safety Instrumented Systems (4-20 mA only)
	Safety Messages	page 8-1
	Overview	page 8-3
	Functional Specifications	page 8-4
	Installation	page 8-4
	Configuration	page 8-4
	Operation and Maintenance	page 8-5
	References	page 8-7
	Spare Parts	page 8-7
	Terms and Definitions	page 8-7

SAFETY MESSAGES

Procedures and instructions in this section may require special precautions to ensure safety of personnel performing the operations. Information that raises potential safety issues is indicated by a warning symbol (). Refer to the following safety messages before performing an operation preceded by this symbol.

Failure to follow these installation guidelines could result in death or serious injury.

•Make sure only qualified personnel perform the installation.

•Use the equipment only as specified in this manual. Failure to do so may impair the protection provided by the equipment.

Explosions could result in death or serious injury.

•Verify that the operating environment of the transmitter is consistent with the appropriate hazardous locations certifications.

•Before connecting a HART®-based communicator in an explosive atmosphere, make sure the instruments in the loop are installed in accordance with intrinsically safe or non-incendive field wiring practices.

Electrical shock could cause death or serious injury.

•Use extreme caution when making contact with the leads and terminals.

www.rosemount.com