Emerson Process Management 5300 manual Saveconfignow

Rosemount 5300 Series

Reference Manual

00809-0100-4530, Rev BA July 2009

Parameter	Index		Description
	Number
SAVE_CONFIG_NOW	61	Allows the user to optionally save all non-volatile information immediately.
SECURITY_IO	65	Status of security switch.
SELF_TEST	59	Instructs resource block to perform self-test. Tests are device specific.
SET_FSTATE	29	Allows the FAIL_SAFE condition to be manually initiated by selecting Set.
SHED_RCAS	26	Time duration at which to give up on computer writes to function block RCas locations.
		Shed from RCas shall never happen when SHED_ROUT = 0
SHED_ROUT	27	Time duration at which to give up on computer writes to function block ROut locations.
		Shed from ROut shall never happen when SHED_ROUT = 0
SIMULATE_IO	64	Status of simulate switch.
SIMULATE_STATE	66	The state of the simulate switch:
		0	= Uninitialized
		1	= Switch off, simulation not allowed
		2	= Switch on, simulation not allowed (need to cycle jumper/switch)
		3	= Switch on, simulation allowed
ST_REV	01	The revision level of the static data associated with the function block.
START_WITH_DEFAULTS	63	0	= Uninitialized
		1	= do not power-up with NV defaults
		2	= power-up with default node address
		3	= power-up with default pd_tag and node address
		4	= power-up with default data for the entire communications stack (no application data)
STRATEGY	03	The strategy field can be used to identify grouping of blocks.
SUMMARY_STATUS	56	An enumerated value of repair analysis.
TAG_DESC	02	The user description of the intended application of the block.
TEST_RW	08	Read/write test parameter - used only for conformance testing.
UPDATE_EVT	35	This alert is generated by any change to the static data.
WRITE_ALM	40	This alert is generated if the write lock parameter is cleared.
WRITE_LOCK	34	When hardware write protection is selected, WRITE_LOCK becomes an indicator of the
		jumper setting and is unavailable for software write protection.
		When software write lock is selected, and WRITE_LOCK is set, no writings from
		anywhere else are allowed, except to clear WRITE_LOCK. Block input will continue to be
		updated.
WRITE_PRI	39	Priority of the alarm generated by clearing the write lock.
XD_OPTION	44	Indicates which transducer block licensing options are enabled.

I-4