Emerson Process Management 5300 manual Logging Measurement Data, Browse, Update rate Start Log

Reference Manual

00809-0100-4530, Rev BA July 2009

Rosemount 5300 Series

LOGGING MEASUREMENT DATA

Figure 7-13. The Log Registers function can be used to verify that the transmitter works properly.

By using the Log Device Registers function in the RRM software, you can log Input and Holding registers over time. It is possible to choose from different pre-defined sets of registers. This function is useful for verifying that the transmitter works properly.

To log device registers, choose the Tools>Log Device Registers option to open the Log Registers window:

Browse Select Register

Update rate

Start Log

To start logging:

1.Click the Browse button, select a directory to store the log file, and type a log file title.

2.Click the Select Register button and choose register type to be logged.

3.Select the desired registers to be logged. There are three options available: Standard, Service, and Custom. Standard and Service refer to pre-defined sets of registers. The Custom option lets you choose the desired range of registers.

4.Enter the update rate. An update rate of for example 10 seconds means that the plot will be updated every 10 seconds.

5.Click the Start Log button. The logging will proceed until stopped by clicking the Stop Log button.

7-19