Emerson Process Management 5300 manual Geomtankheight

Rosemount 5300 Series

Reference Manual

00809-0100-4530, Rev BA July 2009

Parameter	Index Number	Description
TCL	37	This parameter is used for User Defined probes only. Please
		contact Emerson Process Management Service Department
		for more information
PROPAGATION_FACTOR	38	This parameter is used for User Defined probes only. Please
		contact Emerson Process Management Service Department
		for more information
REF_PULSE_AMPL	39	This parameter is used for User Defined probes only. Please
		contact Emerson Process Management Service Department
		for more information
GEOM_TANK_HEIGHT	40	Tank Height (R)
GEOM_HOLD_OFF_DIST	41	Hold off distance
VAPOR_DC	42	Enter the dielectric constant for the vapor gas in the tank. For
		air at 20 degC and atmospherical pressure the vapor DC is
		close to 1, but for high pressure/high temperature applications
		the DC may increase and affect the accuracy of the
		measurement
UPPER_PRODUCT_DC	43	Enter the Upper Product Dielectric Constant (DC) as dielectric
		accurate as possible. This value affects the accuracy of the
		interface level measurement
LOWER_PRODUCT_DC_RANGE	44	Enter the range of the dielectric constant (DC) for the lower
		product in the tank. If you are uncertain about the value for
		this parameter or are changing product in the tank on a
		regular basis choose Unknown
PRODUCT_DIELEC_RANGE	45	Enter the range of the Product DC for the product in the tank.
		If you are uncertain about the value for this parameter or are
		changing product in the tank on a regular basis choose
		Unknown
MEAS_MODE	46	Select the Measurement Mode to use in the device. Some
		modes require software options to be enabled in the device.
		You can upgrade the device to enable more software options
DAMP_VALUE	47	Damping value
GEOM_OFFSET_DIST	48	Distance Offset
GEOM_CALIBRATION_DIST	49	Calibration Distance
LCD_SETTINGS	50
LCD_PARAMETERS	51	Parameters to show
LCD_LANGUAGE	52	Language on display
LCD_LENGTH_UNIT	53	Length unit on display
LCD_VOLUME_UNIT	54	Volume unit on display
LCD_TEMPERATURE_UNIT	55	Temperature unit on display
LCD_VELOCITY_UNIT	56	Velocity unit on display
MAX_INTERNAL_TEMPERATURE	57	The maximum temperature that has been measured inside
		the device during operation
MIN_INTERNAL_TEMPERATURE	58	The minimum temperature that has been measured inside the
		device during operation
OPERATION TIME	59	The total number of hours the device has been in operation
ENV_ENVIRONMENT	60	Process Condition
ENV_PRESENTATION	61	Tank Presentation
ENV_DEVICE_MODE	62	Service mode
ENV_WRITE_PROTECT	63	Write protect
DIAGN_DEVICE_ALERT	64	Errors, Warnings, Status, Plant web alerts
DIAGN_VERSION	65	Gauge SW version
DIAGN_REVISION	66	P1451 revision
DIAGN_DEVICE_ID	67	Device ID for the gauge.
DIAGN_DEVICE_MODEL	68	Type of 5300. LF or HF
STATS_ATTEMPTS	69	The total number of messages sent to the transducer A/D
		board
STATS_FAILURES	70	The total number of failed A/D board message attempts

F-4