Emerson Process Management 5300 manual Maintpri

Reference Manual

00809-0100-4530, Rev BA July 2009

Rosemount 5300 Series

Parameter	Index	Description
	Number
MAINT_ALM	78	Alarm indicating the device needs maintenance soon. If the condition is ignored, the
		device will eventually fail.
MAINT_ENABLE	75	Enabled MAINT_ALM alarm conditions. Corresponds bit for bit to the MAINT_ACTIVE. A
		bit on means that the corresponding alarm condition is enabled and will be detected. A bit
		off means the corresponding alarm condition is disabled and will not be detected.
MAINT_MASK	76	Mask of MAINT_ALM. Corresponds bit of bit to MAINT_ACTIVE. A bit on means that the
		condition is masked out from alarming.
MAINT_PRI	74	Designates the alarming priority of the MAINT_ALM
MANUFAC_ID	10	Manufacturer identification number – used by an interface device to locate the DD file for
		the resource.
MAX_NOTIFY	31	Maximum number of unconfirmed notify messages possible.
MEMORY_SIZE	22	Available configuration memory in the empty resource. To be checked before
		attempting a download.
MESSAGE_DATE	57	Date associated with the MESSAGE_TEXT parameter.
MESSAGE_TEXT	58	Used to indicate changes made by the user to the device's installation, configuration,
		or calibration.
MIN_CYCLE_T	21	Time duration of the shortest cycle interval of which the resource is capable.
MISC_OPTION	47	Indicates which miscellaneous licensing options are enabled.
MODE_BLK	05	The actual, target, permitted, and normal modes of the block:
		Target: The mode to “go to”
		Actual: The mode the “block is currently in”
		Permitted: Allowed modes that target may take on
		Normal: Most common mode for actual
NV_CYCLE_T	23	Minimum time interval specified by the manufacturer for writing copies of NV parameters
		to non-volatile memory. Zero means it will never be automatically copied. At the end of
		NV_CYCLE_T, only those parameters which have changed need to be updated in
		NVRAM.
OUTPUT_BOARD_SN	53	Output board serial number.
PWA_SIMULATE	85	Parameter allowing simulation of PWA alarms.
RB_SFTWR_REV_ALL	51	The string will contains the following fields:
		Major rev: 1-3 characters, decimal number 0-255
		Minor rev: 1-3 characters, decimal number 0-255
		Build rev: 1-5 characters, decimal number 0-255
		Time of build: 8 characters, xx:xx:xx, military time
		Day of week of build: 3 characters, Sun, Mon,...
		Month of build: 3 characters, Jan, Feb.
		Day of month of build: 1-2 characters, decimal number 1-31
		Year of build: 4 characters, decimal
		Builder: 7 characters, login name of builder
RB_SFTWR_REV_BUILD	50	Build of software that the resource block was created with.
RB_SFTWR_REV_MAJOR	48	Major revision of software that the resource block was created with.
RB_SFTWR_REV_MINOR	49	Minor revision of software that the resource block was created with.
RECOMMENDED_ACTION	68	Enumerated list of recommended actions displayed with a device alert.
RESTART	16	Allows a manual restart to be initiated. Several degrees of restart are possible. They are
		the following:
		1 Run – nominal state when not restarting
		2 Restart resource – not used
		3 Restart with defaults – set parameters to default values. See
		START_WITH_DEFAULTS below for which parameters are set.
		4 Restart processor – does a warm start of CPU.
RS_STATE	07	State of the function block application state machine.
SAVE_CONFIG_BLOCKS	62	Number of EEPROM blocks that have been modified since last burn. This value will
		count down to zero when the configuration is saved.

I-3