Scotts S2546 manual Adjusting Mower Level Front-to-Rear

Page 21

OPERATING MOWER

C

B

D

E

7.Loosen top clamping nut (C) facing inside of mower, on left hand side J-bolt (B), approximately one turn.

8.Loosen upper adjusting nut (D).

9.Raise or lower left side of deck.

•To raise: Turn lower adjusting nut (E) towards rear of tractor.

•To lower: Turn lower adjusting nut (E) towards front of tractor.

10.Tighten upper adjusting nut.

11.Tighten clamping nut.

12.Check side-to-side measurements and readjust if necessary.

Adjusting Mower Level (Front-to-Rear)

cCAUTION: Avoid injury, before you adjust

mower: STOP engine, remove key, and wait for blades to STOP.

Be careful, sharp edges on mower blades. Always wear gloves when handling mower blades.

IMPORTANT: Avoid machine damage. Make sure each front draft rod is equally tensioned. The installed rods should exhibit identical amounts of movement between left and right rods. If one rod moves more freely than the other, the adjustment nut should be tightened until the movement of the assembly matches that of the other side.

1.Park tractor on a hard, level surface.

2.Stop engine and remove key.

3.CHECK: Tire pressure must be correct. (See Checking Tire Pressure in Service – Miscellaneous section.)

A

4.Turn blades so front blade tips (A) point straight forward.

5.Measure from the front of each blade tip to the level surface. The front blade tips must be 6–9 mm (1/4–3/8 in.) lower than rear blade tips or blades will cut grass twice and grass tips will turn brown.

C

C

B

B

6.Turn nuts (B) on front draft rods (C) equally until adjustment is correct. Turn nut clockwise to RAISE front of mower deck or counterclockwise to LOWER front of mower deck.

7.Check front-to-rear deck measurements and readjust if necessary.

Operating Mower - Page 18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents OPERATOR’S Manual Thank YOU for purchasing a Scotts product IntroductionTable of Contents Assembly Connect and Check BatteryIdentify Parts Tire Size Pressure-kPa psi Checking Tire PressureSafety-Alert Symbol Safety SignsMachine Safety Labels CertificationPicture Note Located on Battery under seat Picture Note Located on Right-Hand side of deckPicture Note Located on Left-Hand side of deck Tractor Controls ControlsOperating Machine Operate SafelyPark Safely Wear Appropriate Clothing Avoid Tipping Keep Riders OffAdjusting Seat Using the Park BrakeTransport Safely Using Throttle Control Starting EngineCold Weather Starting Tips Warming and Idling Engine Using Travel ControlsStopping Engine Disengage mower or attachment before backing upTo Travel in Reverse Using Reverse Implement OptionTesting Safety Systems Daily Operating ChecklistPushing Machine TestTest Avoid Damage to Plastic and Painted Surfaces Using Front Weights Avoid Using Ground Engaging EquipmentUsing Rear Wheel Weights Using Tire ChainsOperating Mower Adjusting Cutting HeightOperate Mower Safely Check Ground ConditionsM40161 Adjusting Mower Level Front-to-Rear Engaging and Disengaging Mower Dismounting to Inspect or Unplug Mower or Optional BaggerDisengaging Mower John Deere Quality Replacement PartsParts for Tractor Parts for Mower Decks Inch DeckService Machine Safely Practice Safe MaintenanceAvoid Injury From Contacting Blades Service Intervals Service Interval ChartService Record Adjusting Carburetor Service EngineAvoid Fumes Engine OilChecking Engine Oil Changing Engine Oil and Filter Make sure engine is Cold when checking engine oil levelChecking and Cleaning Air Cleaner Elements Checking Spark Plugs Service precleanerReplacing Fuel Filter Grease Service Steering and BrakesWheel Spindles Axle PivotAdjusting Brakes Avoid Injury From Contacting Blades Grease Service MowerReplacing Mower Drive Belt Adjusting Mower Belt TensionAdjusting Spindle Brake Servicing Mower Blades Checking Mower BladesBalancing Blades Sharpening BladesChecking the Battery Service ElectricalClean Battery and Terminals Removing and Installing the BatteryCharging the Battery Replacing Headlight Bulb Using Booster BatteryReplacing Fuse Fuel Service MiscellaneousUsing Fresh Fuel and Stabilizers Using Clean FuelsOctane Rating Fuel BlendsCare for Plastic and Painted Surfaces Avoid DamageRepair Service Miscellaneous Removing Mower Removing MowerInstalling Mower Installing MowerPicture Note Front of left hand front wheel shown Picture Note Left side of tractor shownInstalling Mower Troubleshooting Using Troubleshooting ChartEngine Troubleshooting Mower Troubleshooting Storing Safely Storing MachinePreparing Machine for Storage Preparing Engine For StorageRemoving Machine From Storage Specifications DimensionsElectrical System Mower Deck TiresRecommended Lubricants Cutting Width mm 46Limited Warranty for NEW Scotts Brand Products WarrantyLimited Engine Warranty Tire WarrantyWarranted Parts To Secure Warranty Service Limited Battery WarrantyGrease IndexRemoving Mower Reverse Implement Option, Using Service Literature Order FormTitle Number Price Qty Total Page Page Refer to your operator’s manual Investment in QualityContact your dealer Call the Customer Communications Center

S2546 specifications

The Scotts S2546 is an innovative lawn tractor that has been designed to provide homeowners with a reliable and efficient gardening solution. With a powerful 24 horsepower engine, this machine can manage various lawn care tasks, making it ideal for medium to large yards. It combines performance with ease of use, ensuring that even novice users can operate it effectively without prior experience.

One of the key features of the Scotts S2546 is its 46-inch cutting deck. This spacious deck allows for wider mowing paths, reducing the time spent on mowing and making it perfect for larger lawns. The cutting height can be easily adjusted through a simple lever, offering a range of heights from one to four inches. This flexibility helps users achieve the desired lawn appearance while promoting healthy grass growth.

The S2546 incorporates advanced technologies to enhance mowing performance. Its auto transmission system delivers a smooth driving experience, allowing users to adjust speed easily with just a push of the pedal. This feature provides optimal control while navigating through various terrains and obstacles in the yard. Additionally, the tight turning radius of this lawn tractor enables easy maneuverability around garden beds and trees.

Another standout characteristic of the Scotts S2546 is its user-friendly design. The comfortable high-back seat provides ample support, reducing fatigue during long mowing sessions. The intuitive control layout places all essential functions within easy reach, making it simple for users to maintain focus on their mowing tasks. Furthermore, the onboard storage compartments offer convenient space for tools and accessories, keeping everything organized and ready for use.

Safety features are also a priority in the S2546, with an automatic engine shut-off if the operator leaves the seat, preventing accidents. The durable construction of the tractor ensures that it can withstand the rigors of regular use, while the powder-coated finish protects against rust and weathering.

In summary, the Scotts S2546 lawn tractor stands out due to its robust engine, expansive cutting deck, and user-friendly design. With advanced technology, enhanced safety features, and a focus on comfort and control, it is a dependable choice for homeowners looking to maintain their lawns efficiently and effectively. Whether mowing, mulching, or bagging, the S2546 delivers an exceptional lawn care experience.
Top Page Image Contents