Scotts S2546 manual Storing Machine, Storing Safely, Preparing Machine for Storage

Page 54

STORING MACHINE

Storing Safely

cCAUTION: Avoid injury. Engine exhaust fumes can cause sickness or death.

-If it is necessary to run an engine in an enclosed area, use an exhaust pipe extension to remove the fumes.

-Always try to work in a well ventilated area.

-DO NOT store vehicle with fuel in the tank inside a building where fumes may reach an open flame or spark.

-Allow engine to cool before storing in an enclosure.

-Remove the battery and store it in a cool dry place where it will not freeze, and where children cannot reach it.

Preparing Machine for Storage

1.Repair any worn or damaged parts. Replace parts if necessary. Tighten loose hardware.

2.Clean under the deck.

3.Paint scratched or chipped metal surfaces to prevent rust.

4.Wash the machine and apply wax to metal and plastic surfaces. (See SERVICE-MISCELLANEOUS section for care of plastic and metal surfaces.)

5.Run machine for five minutes to dry belts and pulleys.

6.Apply light coat of engine oil to pivot and wear points to prevent rust.

7.Lubricate grease points.

8.Make sure tires are properly inflated.

Preparing Engine For Storage

NOTE: Properly preparing your tractor engine for storage will make it easier to start the following season. Engine storage procedure should be used if vehicle is not used for longer than 60 days.

There are two satisfactory methods of preparing the engine for storage: running the engine completely dry of fuel, or filling the fuel tank with a mixture of fresh fuel and fuel stabilizer.

Running engine dry of fuel:

NOTE: Try to anticipate the last time the tractor will be used for the season so very little fuel is left in the fuel tank.

1.Park tractor in a well-ventilated area.

2.Engage park brake and disengage PTO.

3.Turn on engine and allow to run until it runs out of fuel.

4.Turn key to OFF position.

5.Continue with Preparing Engine.

Add fuel and stabilizer mixture to tank:

1. Park tractor in a well-ventilated area.

IMPORTANT: Avoid machine damage. Be sure fuel is fresh when adding fuel stabilizer. Fuel stabilizers are ineffective when added to fuels that are more than 30 days old.

2.Mix fresh fuel and fuel stabilizer in separate container. Follow stabilizer instructions for mixing.

NOTE: Filling the fuel tank reduces the amount of air in the fuel tank and helps reduce deterioration of fuel.

3.Fill fuel tank with stabilized fuel.

4.Run engine for a few minutes to allow fuel mixture to circulate through carburetor.

5.Continue with Preparing Engine.

Preparing Engine

1.Change engine oil and filter while engine is warm.

2.Service air filter if necessary.

3.Clean debris from engine air intake screen.

4.Remove spark plugs. Put 30 mL (1 oz.) of clean engine oil in cylinders.

5.Install spark plugs, but DO NOT connect spark plug wires.

6.Crank the engine for approximately five seconds to allow oil to be distributed.

Storing Machine - Page 51

Page 53 Page 55
Image 54
Page 53 Page 55
Contents OPERATOR’S Manual Introduction Thank YOU for purchasing a Scotts productTable of Contents Assembly Connect and Check BatteryIdentify Parts Checking Tire Pressure Tire Size Pressure-kPa psiMachine Safety Labels Safety SignsSafety-Alert Symbol CertificationPicture Note Located on Battery under seat Picture Note Located on Right-Hand side of deckPicture Note Located on Left-Hand side of deck Controls Tractor ControlsOperating Machine Operate SafelyPark Safely Avoid Tipping Keep Riders Off Wear Appropriate ClothingAdjusting Seat Using the Park BrakeTransport Safely Using Throttle Control Starting EngineCold Weather Starting Tips Stopping Engine Using Travel ControlsWarming and Idling Engine Disengage mower or attachment before backing upUsing Reverse Implement Option To Travel in ReversePushing Machine Daily Operating ChecklistTesting Safety Systems TestTest Avoid Damage to Plastic and Painted Surfaces Using Rear Wheel Weights Avoid Using Ground Engaging EquipmentUsing Front Weights Using Tire ChainsOperate Mower Safely Adjusting Cutting HeightOperating Mower Check Ground ConditionsM40161 Adjusting Mower Level Front-to-Rear Engaging and Disengaging Mower Dismounting to Inspect or Unplug Mower or Optional BaggerDisengaging Mower Parts for Tractor Replacement PartsJohn Deere Quality Parts for Mower Decks Inch DeckService Machine Safely Practice Safe MaintenanceAvoid Injury From Contacting Blades Service Interval Chart Service IntervalsService Record Avoid Fumes Service EngineAdjusting Carburetor Engine OilMake sure engine is Cold when checking engine oil level Checking Engine Oil Changing Engine Oil and FilterChecking and Cleaning Air Cleaner Elements Service precleaner Checking Spark PlugsReplacing Fuel Filter Wheel Spindles Service Steering and BrakesGrease Axle PivotAdjusting Brakes Service Mower Avoid Injury From Contacting Blades GreaseAdjusting Mower Belt Tension Replacing Mower Drive BeltAdjusting Spindle Brake Checking Mower Blades Servicing Mower BladesSharpening Blades Balancing BladesClean Battery and Terminals Service ElectricalChecking the Battery Removing and Installing the BatteryCharging the Battery Using Booster Battery Replacing Headlight BulbReplacing Fuse Service Miscellaneous FuelOctane Rating Using Clean FuelsUsing Fresh Fuel and Stabilizers Fuel BlendsCare for Plastic and Painted Surfaces Avoid DamageRepair Service Miscellaneous Removing Mower Removing MowerPicture Note Front of left hand front wheel shown Installing MowerInstalling Mower Picture Note Left side of tractor shownInstalling Mower Troubleshooting Using Troubleshooting ChartEngine Troubleshooting Mower Troubleshooting Preparing Machine for Storage Storing MachineStoring Safely Preparing Engine For StorageRemoving Machine From Storage Specifications DimensionsElectrical System Recommended Lubricants TiresMower Deck Cutting Width mm 46Warranty Limited Warranty for NEW Scotts Brand ProductsTire Warranty Limited Engine WarrantyWarranted Parts Limited Battery Warranty To Secure Warranty ServiceIndex GreaseRemoving Mower Reverse Implement Option, Using Service Literature Order FormTitle Number Price Qty Total Page Page Contact your dealer Investment in QualityRefer to your operator’s manual Call the Customer Communications Center

S2546 specifications

The Scotts S2546 is an innovative lawn tractor that has been designed to provide homeowners with a reliable and efficient gardening solution. With a powerful 24 horsepower engine, this machine can manage various lawn care tasks, making it ideal for medium to large yards. It combines performance with ease of use, ensuring that even novice users can operate it effectively without prior experience.

One of the key features of the Scotts S2546 is its 46-inch cutting deck. This spacious deck allows for wider mowing paths, reducing the time spent on mowing and making it perfect for larger lawns. The cutting height can be easily adjusted through a simple lever, offering a range of heights from one to four inches. This flexibility helps users achieve the desired lawn appearance while promoting healthy grass growth.

The S2546 incorporates advanced technologies to enhance mowing performance. Its auto transmission system delivers a smooth driving experience, allowing users to adjust speed easily with just a push of the pedal. This feature provides optimal control while navigating through various terrains and obstacles in the yard. Additionally, the tight turning radius of this lawn tractor enables easy maneuverability around garden beds and trees.

Another standout characteristic of the Scotts S2546 is its user-friendly design. The comfortable high-back seat provides ample support, reducing fatigue during long mowing sessions. The intuitive control layout places all essential functions within easy reach, making it simple for users to maintain focus on their mowing tasks. Furthermore, the onboard storage compartments offer convenient space for tools and accessories, keeping everything organized and ready for use.

Safety features are also a priority in the S2546, with an automatic engine shut-off if the operator leaves the seat, preventing accidents. The durable construction of the tractor ensures that it can withstand the rigors of regular use, while the powder-coated finish protects against rust and weathering.

In summary, the Scotts S2546 lawn tractor stands out due to its robust engine, expansive cutting deck, and user-friendly design. With advanced technology, enhanced safety features, and a focus on comfort and control, it is a dependable choice for homeowners looking to maintain their lawns efficiently and effectively. Whether mowing, mulching, or bagging, the S2546 delivers an exceptional lawn care experience.
Top Page Image Contents